Technical data, tools and notes for refrigeration and electronics technicians.

Embraco NEU2178GK, compressor mbsmpro
2, Jan 2026
Embraco NEU2178GK, compressor
image_pdfimage_print

Mbsmpro.com, Embraco, NEU2178GK, 1 HP, LBP, R404A, 220-240V, 50Hz, 16.8 cc, CSR, Commercial Freezer Compressor


The Cold Heart of Commercial Freezing: Embraco NEU2178GK

If you are an artisan bricoleur or a refrigeration technician working on commercial island freezers or restaurant reach-ins, you have likely encountered the Embraco NEU2178GK. This isn’t your standard domestic fridge compressor; this is a 1 HP powerhouse designed for the heavy lifting required by Low Back Pressure (LBP) applications using R404A or R507 refrigerant.

Known for its robust “Made in Slovakia” build, the NEU2178GK is a CSR (Capacitor Start, Capacitor Run) motor. This is a critical detail for technicians: unlike simpler PTCSCR compressors, this unit relies on a precise electrical box containing both a start capacitor and a run capacitor to manage its high starting torque (HST). It is the engine you choose when you need reliability in a -30°C environment.

Why the “GK” Matters

In Embraco’s nomenclature, the “K” at the end (as in NEU2178GK) often signifies a specific motor type—in this case, one designed for High Starting Torque. This means it can restart even if pressures haven’t fully equalized, a common scenario in busy commercial kitchens where doors are opened frequently.


Technical Specifications: The Data You Need

Here is the breakdown of the technical capabilities of this compressor.

FeatureSpecification
ModelNEU2178GK
BrandEmbraco (Nidec)
Horsepower (HP)1 HP
Displacement16.80 cm³ (cc)
RefrigerantR404A / R507 / R452A
ApplicationLBP (Low Back Pressure)
Voltage220-240V ~ 50Hz
Cooling Capacity~900 W (at -23.3°C ASHRAE)
Motor TypeCSR (Capacitor Start & Run)
Start Capacitor88 – 108 µF / 330V
Run Capacitor15 µF / 400V
Oil TypePOE 22 (Polyolester)
Oil Charge350 ml
Expansion DeviceCapillary or TXV (Expansion Valve)

Exploitation: Installation Tips for the Artisan

Installing a 1 HP commercial compressor is different from swapping a domestic one. Here are the “golden rules” for the NEU2178GK:

  1. The Electric Box is Mandatory: You cannot bypass the capacitor box. This motor needs the 15µF run capacitor to maintain efficiency and keep the windings cool, and the start capacitor to kick the rotor into motion against high head pressure.
  2. Moisture is the Enemy: This compressor comes filled with POE oil. POE is like a sponge for humidity. If you leave the plugs open for more than 15 minutes, the oil absorbs moisture that vacuum pumps cannot remove. Keep it sealed until the last second.
  3. Nitrogen Sweep: Because R404A systems use POE oil, any carbon from brazing will turn into sludge and block the capillary tube immediately. Always braze with a trickle of nitrogen flowing through the pipes.
  4. R452A Compatibility: If R404A is expensive or restricted in your area, this compressor is often compatible with R452A, a drop-in replacement with a lower GWP (Global Warming Potential), but always check the discharge temperature.

Comparison: Embraco NEU2178GK vs. The Competition

When you can’t find the exact Embraco model, you need a replacement. Here is how it stacks up against the heavyweights from Secop and Tecumseh.

CompressorBrandApprox. HPDisplacementVerdict
NEU2178GKEmbraco1 HP16.8 ccBest for high-torque commercial freezers.
SC21CLSecop (Danfoss)~7/8 – 1 HP20.95 ccOlder design, physically larger, very reliable.
CAJ2464ZTecumseh1.5 HP34.4 ccMuch more powerful; usually overkill for this slot.
NT2180GKEmbraco1 HP20.4 ccThe “big brother” of the NEU series; fits if you have space.

Pro Tip: If replacing a Secop SC21CL with this Embraco NEU2178GK, you may need to adjust the pipework as the Embraco is slightly more compact (lower height: ~206mm vs Secop ~219mm).


Performance Analysis: Power Consumption

One reason technicians love the NEU series is efficiency.

  • Current (Amps): At typical freezer conditions (-25°C), it draws about 4.3 Amps.
  • LRA (Locked Rotor Amps): 21.0 A. If your clamp meter reads 21A instantly and stays there, your compressor is mechanically seized or the start capacitor is dead.


Performance Analysis: Power Consumption

One reason technicians love the NEU series is efficiency.

  • Current (Amps): At typical freezer conditions (-25°C), it draws about 4.3 Amps.
  • LRA (Locked Rotor Amps): 21.0 A. If your clamp meter reads 21A instantly and stays there, your compressor is mechanically seized or the start capacitor is dead.

Embraco NEU2178GK, compressor mbsmpro

Focus Keyphrase: Embraco NEU2178GK 1 HP Compressor R404A

SEO Title: Mbsmpro.com, Embraco, NEU2178GK, 1 HP, LBP, R404A, 220-240V, 50Hz, 16.8 cc, CSR, Commercial Freezer

Meta Description: Discover the Embraco NEU2178GK 1 HP Compressor (R404A/LBP). Full technical specs, CSR wiring guide, and comparisons with Secop and Tecumseh for commercial refrigeration repairs.

Slug: embraco-neu2178gk-1-hp-compressor-r404a-lbp-specs

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Embraco NEU2178GK, 1 HP Compressor, R404A, Commercial Freezer, CSR Motor, NEU2178GK Specs, Refrigeration Repair, 16.8cc Compressor

Excerpt: The Embraco NEU2178GK is the definitive choice for 1 HP commercial freezing applications. Featuring a robust CSR motor and 16.8cc displacement, this R404A compressor delivers high starting torque for demanding environments. This guide details the electrical requirements, installation tips, and how it compares to Secop and Tecumseh alternatives.


Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts

Maneurop MTZ160HW4VE

Maneurop MTZ160HW4VE 13 hp reciprocating compressor R404A R507A R134a R407C 20.3 kW medium temperature cold room applications

Compressor Windings, CSR Terminals

compressor windings CSR pin configuration common start run terminals, PTC relay overload wiring and multimeter resistance testing guide

R134a vs. R600a Compressor Conversion

Switching from R134a to R600a requires more than just changing the gas. This guide explains the critical "Displacement Rule"—why R600a…