Mbsmpro.com, Compressor, ES7FT.4, 1/5 hp, Secop, Cooling, R134a, 147 W, 1.1 A, 1Ph 220‑240V 50Hz, LBP, RSIR, −35°C to −10°C, Static Cooling

The Secop ES7FT.4 represents a pinnacle of energy-optimized engineering for tropical refrigeration environments. Designed specifically for low back pressure (LBP) applications, this hermetic reciprocating compressor is a reliable workhorse for household refrigerators and small commercial freezers. Operating on R134a refrigerant, it balances thermal efficiency with the robust durability required for high-ambient temperature regions.

Technical Specification Table

Attribute	Details
Model	ES7FT.4 (102G4707)
Utilisation	LBP (Low Back Pressure)
Domaine	Freezing / Deep Cooling
Cooling Wattage at -23.3°C	147 Watts (CECOMAF)
Cubic Feet Capacity	Approx. 7 – 10 cu.ft
Liters Capacity	200 – 300 Liters
Kcal/h	126 kcal/h
Oil Type & Quantity	Polyolester (POE) / 180 cm³
Horsepower (HP)	1/5 HP
Refrigerant Type	R134a
Power Supply	220-240V / 50Hz / 1Ph
Cooling Capacity BTU	502 BTU/h
Motor Type	RSIR (Resistance Start – Induction Run)
Displacement	5.70 cm³
Winding Material	Copper
Pression Charge	Low Pressure Side
Capillary Recommendation	0.031″ or 0.8mm (application dependent)
Appliance Type	Domestic Fridge, Chest Freezer, Water Dispenser
Temperature Function	-35°C to -10°C
Cooling System	Static (S)
Commercial Class	Semi-Commercial / Residential
Amperage (RLA)	1.1 A
LRA (Locked Rotor Amps)	5.4 A
Type of Relay	PTC Starter
Capacitor	N/A (RSIR Configuration)
Country of Origin	Slovakia

---

Efficiency Metrics (COP) & Performance Data

The efficiency of the ES7FT.4 is measured by its Coefficient of Performance (COP). Below is the performance breakdown at various evaporating temperatures (Condensing Temp at +55°C).

Evaporating Temp (°C)	Cooling Capacity (Watts)	Power Consumption (Watts)	COP (W/W)
-35	71.6	107	0.67
-30	99.5	125	0.80
-23.3 (Standard)	147	148	0.99
-20	176	160	1.10
-15	228	179	1.27
-10	290	200	1.45

---

Comparison with Alternative Models

When comparing the ES7FT.4 to other popular 1/5 HP units, we see distinct differences in displacement and energy draw. For instance, the ZMC GM70AZ offers similar wattage but often utilizes different winding resistances. The Secop ES series is specifically “Energy Optimized,” meaning it prioritizes a lower amperage draw during the long run cycles typical of LBP freezing.

Professional Recommendations & Field Notice

As an expert in the field, I recommend the following for any technician installing the ES7FT.4:

1. Vacuum Procedure: Always achieve a vacuum of at least 500 microns. R134a and POE oil are highly hygroscopic; moisture will lead to acid formation and premature motor failure.
2. Filter Drier: Replace the filter drier (minimum 15g-20g XH-9) every time the system is opened.
3. Start Components: If the compressor fails to start in high-heat environments, ensure the PTC starter is not cracked. These units rely on a clean electrical signal to engage the start winding.

---

Compressor Replacements (Cross-Reference)

5 Direct Replacements (R134a)

• Embraco: EMT6170Z or EMY70HSC
• Danfoss: TLS7F
• ZMC: GL70AA
• Tecumseh: THG1365Y
• Jiaxipera: ND1111Y

5 Replacements (Alternative Gas – R600a)

Note: Requires complete system flushing and capillary adjustment.

• Secop: TLES7.5KK.3
• Embraco: EMX70CLC
• ACC/Seko: HMK80AA
• Donper: L76CZ1
• Huayi: HYE69Y

---

Focus Keyphrase: Secop ES7FT.4 Compressor 1/5 HP R134a Technical Specifications and Replacements

SEO Title: Secop ES7FT.4 Compressor | 1/5 HP | R134a | Mbsmpro.com Technical Guide

Meta Description: Detailed technical sheet for the Secop ES7FT.4 (102G4707) compressor. Includes 1/5 HP power ratings, R134a gas data, cooling capacity tables, and 10 expert replacement options for refrigeration repair.

Slug: secop-es7ft4-compressor-1-5hp-r134a-specs

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Secop, ES7FT.4, 102G4707, 1/5 HP, R134a, LBP Compressor, Refrigerator Repair, EMT6170Z, TLS7F, GL70AA, THG1365Y, ND1111Y, TLES7.5KK.3

Excerpt: The Secop ES7FT.4 is a high-efficiency 1/5 HP hermetic compressor engineered for R134a LBP applications. With a displacement of 5.70 cm³ and a cooling capacity of 147W at -23.3°C, it is an ideal choice for tropical refrigeration. This guide provides full technical data, COP metrics, and professional replacement cross-references for HVAC technicians.

Mbsm.pro, Compressor, SECOP, GTK70AT, 1/5+ HP, R134a, 220-240V 50Hz, LBP, Refrigerator, Freezer

The SECOP GTK70AT is a cornerstone in the world of high-efficiency domestic refrigeration. Engineered in Slovakia, this compressor represents the evolution of the Kappa series, offering a robust solution for Low Back Pressure (LBP) applications. It is specifically designed to handle the demanding pull-down requirements of modern energy-efficient refrigerators and medium-sized chest freezers using R134a refrigerant.

Technicians value the GTK70AT for its high reliability and relatively low noise profile. Unlike standard 1/5 HP units, this “Plus” model provides a slight edge in displacement, ensuring that during high-ambient temperature conditions, the cooling curve remains stable without stressing the motor windings.

---

Technical Data Sheet

Feature	Specification
Model	GTK70AT
Utilisation	LBP (Low Back Pressure)
Domaine	Freezing / Cooling
Cooling Wattage (-23.3°C)	195 W
Cubic Feet Capacity	10 – 14 cu.ft
Litres Capacity	280 – 400 Liters
Kcal/h	168 Kcal/h
Oil Type and Quantity	POE (Polyolester) / 180 ml
Horsepower (HP)	1/5+ HP
Refrigerant Type	R134a
Power Supply	200-240V ~ 50Hz
Cooling Capacity BTU	665 BTU/h
Motor Type	RSIR/RSCR (depending on starter kit)
Displacement	6.64 cm³
Winding Material	Copper
Pression Charge	Low side (0.5 to 1.5 psi running)
Capillary Recommendation	0.031″ or 0.036″ (Length varies by design)
Application Range	Double door fridges, Upright freezers
Temperature Range	-35°C to -10°C
Cooling Type	Static (No fan required for compressor)
Commercial Use	Light Commercial / Domestic
Amperage (RLA)	0.9 A to 1.1 A
LRA (Locked Rotor Amps)	6.1 A
Starter Type	PTC Relay
Capacitor	4µF Run Capacitor (Optional for RSCR)
Origin	Slovakia

---

Efficiency Metrics (COP) – Performance Data

Evaporating Temp (°C)	Cooling Capacity (Watts)	Power Consumption (Watts)	COP (W/W)
-30	140	115	1.22
-25	182	131	1.39
-23.3	195	138	1.41
-20	235	150	1.57
-15	302	171	1.77
-10	385	195	1.97

---

Comparison: GTK70AT vs. Standard Series

When comparing the GTK70AT to the older TLES or GL series, the GTK series offers a more compact shell design which aids in reducing vibration resonance. While a standard 1/5 HP compressor like the GL70AA uses about 6.0cm³ displacement, the GTK70AT’s 6.64cm³ displacement allows it to reach target temperatures 15% faster, making it ideal for “Tropical Class” appliances.

Professional Advice & Maintenance Tips

• Oil Sensitivity: Always use POE oil if a recharge is necessary. Never mix with mineral oil, as R134a systems will undergo wax plating and clog the capillary.
• Filter Drier: Always replace the filter drier when swapping a compressor. A 20g XH-9 molecular sieve is recommended for this model.
• Vacuuming: Ensure a vacuum of at least 500 microns to remove all moisture, as the GTK series is sensitive to internal acid formation if moisture remains.

---

Compressor Cross-Reference & Replacements

5 Replacements (Same Refrigerant – R134a)

1. Embraco: EMY70HLC / EMT6170Z
2. Danfoss: TLS7F
3. Tecumseh: THG1365YS
4. Huayi: HYE69YL
5. ZMC: GL70AA / GVY66AA

5 Replacements (Different Refrigerant – R600a/R290)

1. Secop: NLE7.0KK.4 (R600a)
2. Embraco: EMX70CLC (R600a)
3. Jiaxipera: NT1114Y (R600a)
4. Secop: DLE7.5CN (R290 – High efficiency)
5. Tecumseh: TLY7.5KK.3 (R600a)

---

Focus Keyphrase: Secop GTK70AT Compressor Specifications and Equivalents

SEO Title: Mbsm.pro – SECOP GTK70AT Compressor: 1/5+ HP R134a LBP Technical Review

Meta Description: Detailed technical analysis of the SECOP GTK70AT compressor. Includes cooling capacity, COP efficiency tables, HP ratings, and direct replacement guides for R134a refrigeration systems.

Slug: secop-gtk70at-compressor-1-5-hp-r134a-specs

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, GTK70AT, Secop, R134a, 1/5 HP, Refrigeration, Compressor Replacement, EMY70HLC, TLS7F, THG1365YS, GL70AA, HVAC Slovakia.

Excerpt: The SECOP GTK70AT is a high-performance 1/5+ HP compressor designed for R134a Low Back Pressure (LBP) applications. Featuring a 6.64 cm³ displacement and 195W cooling capacity at -23.3°C, this Slovakian-made unit is a reliable choice for domestic freezers and refrigerators. This guide provides full technical specs, COP metrics, and professional replacement equivalents.

---

Technical Specifications: Danfoss NL7.3FT Compressor

Feature	Detail
Model	Danfoss NL7.3FT (Code: 105G6726)
Utilisation	LBP (Low Back Pressure)
Domaine	Freezing / Cold Storage
Cooling Wattage at -23.3°C	185 Watts
Kcal/h	159 Kcal/h
Oil Type and Quantity	Ester (POE), 320 cm³
Horsepower (HP)	1/4 HP (Approx. 0.25 HP)
Refrigerant Type	R134a
Power Supply	220-240V / 50Hz / 1Ph
Cooling Capacity BTU	631 BTU/h
Motor Type	RSIR/CSIR (High Starting Torque capability)
Displacement	7.27 cm³
Winding Material	Copper
Pressure Charge	Low side (Suction)
Capillary	0.031″ – 0.036″ (Size varies by application)
Compatible Refrigerators	Whirlpool, Indesit, Ariston, Domestic Chest Freezers
Temperature Function	-35°C to -10°C
With Fan or No	Static or Fan-assisted (Usually Static in domestic)
Commercial or No	Domestic and Light Commercial
Amperage (FLA)	~1.1 A to 1.3 A
LRA (Locked Rotor Amps)	9.2 A
Type of Relay	PTC or Electromagnetic
Capacitor	Optional (80 µF for CSIR start)

---

Compressor Cross-Reference & Replacements

Same Refrigerant (R134a)

1. Embraco NEK2125GK / FFI8.5HAK
2. Secop TLES7.5FT.3
3. Tecumseh AEZ1380Y
4. ACC / Cubigel GL80AA / GL80AB
5. Huayi HYB81MHU

Alternative Refrigerants (R600a/R290)

1. Embraco EMT6170Z (R404A conversion)
2. Secop NLE8.8CN (R290 – High Efficiency)
3. Embraco VEMZ 9C (R600a Inverter upgrade)
4. Donper KK73FT (R134a direct clone)
5. Jiaxipera NT1114Y (R600a equivalent cooling)

---

Mbsmpro.com, Compressor, Danfoss, NL7.3FT, 1/4 hp, Secop, Cooling, R134a, 185 W, 1.3 A, 1Ph 220-240V 50Hz, LBP, RSIR, -35°C to -10°C, Freezing

The refrigeration industry relies heavily on the reliability of the heart of the system: the compressor. Among the elite performers in the domestic and light commercial sector, the Danfoss NL7.3FT stands out as a robust, European-engineered solution. Transitioning from the legacy Danfoss brand to Secop, this model remains a staple for technicians who demand durability and high thermal efficiency in low-temperature environments.

Efficiency Metrics (COP) & Performance Data

Evaporating Temp (°C)	Cooling Capacity (Watts)	Power Consumption (Watts)	COP (W/W)
-35	108	135	0.80
-30	145	158	0.92
-23.3	185	184	1.01
-20	225	205	1.10
-15	295	230	1.28
-10	380	255	1.49

Engineering Insight: Why the NL7.3FT?

As an engineer in the field, I’ve found that the NL7.3FT excels because of its internal suspension system. Unlike cheaper alternatives that vibrate excessively and cause copper fatigue, the Danfoss “NL” series uses a refined valve plate design that reduces noise while maintaining high volumetric efficiency.

When comparing it to the Embraco FFI series, the Danfoss NL7.3FT often shows a more stable performance under fluctuating voltage (220-240V range). It is specifically designed for LBP (Low Back Pressure), making it the ideal candidate for deep freezers where the goal is to reach -23°C quickly and hold it with minimal energy consumption.

Field Notes & Expert Advice

• Capillary Cleaning: If you are replacing a burnt-out NL7.3FT, always flush the system with R141b. R134a systems are prone to paraffin wax buildup in the capillary tube.
• Oil Management: This unit uses POE oil. Avoid leaving the suction ports open for more than 10 minutes, as POE oil is highly hygroscopic (it absorbs moisture from the air instantly).
• The LST/HST Factor: While rated for Low Starting Torque, adding a start capacitor (80µF) can convert this into a High Starting Torque unit, which is a lifesaver in regions with unstable power grids.

---

Focus Keyphrase: Danfoss NL7.3FT Compressor R134a 1/4 HP Low Back Pressure Refrigeration

SEO Title: Mbsmpro.com | Danfoss NL7.3FT Compressor | 1/4 HP R134a LBP Technical Specs

Meta Description: Discover the full technical specifications of the Danfoss NL7.3FT compressor. Learn about its cooling capacity, 185W output, R134a compatibility, and cross-reference replacements for professional refrigeration repair.

Slug: danfoss-nl7-3ft-compressor-r134a-1-4-hp-specs

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Danfoss NL7.3FT, Secop 105G6726, 1/4 HP Compressor, R134a LBP, Embraco NEK2125GK Replacement, Fridge Compressor Repair, NL7.3FT Specs, HVAC Engineering.

Excerpt: The Danfoss NL7.3FT is a high-performance LBP compressor designed for R134a refrigerant, delivering 185 Watts of cooling capacity at -23.3°C. Ideal for domestic freezers and light commercial units, this 1/4 HP motor offers exceptional reliability and low noise levels, making it a favorite for professional technicians and refrigeration engineers globally.

Focus Keyphrase: Huayi HYE69Y63 Compressor 1/5 HP R134a LBP Technical Specifications and Professional Cross-Reference Guide for Refrigerator Repair

SEO Title: Mbsmpro.com, Compressor, HYE69Y63, 1/5 hp, Huayi, Cooling, R134a, 168 W, 1.2 A, 1Ph 220-240V 50/60Hz, LBP, RSIR, -35°C to -10°C, freezing

Meta Description: Technical analysis of the Huayi HYE69Y63 1/5 HP compressor. Learn about its R134a performance, LBP cooling capacity, electrical wiring schemas, and top 10 replacement alternatives for technicians.

Slug: huayi-hye69y63-compressor-r134a-1-5-hp-specs

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Huayi, HYE69Y63, R134a, 1/5 HP, LBP, Refrigerator Repair, HVAC, GL70AA, EMT55HLP, PE75H1C, PL50F, FFI6HAK, NTU170MT, HMK12AA, HTK12AA, HYB12MHU, NT1114Y

Excerpt: The Huayi HYE69Y63 is a highly efficient hermetic reciprocating compressor designed for low back pressure applications using R134a refrigerant. With a 1/5 HP rating and dual-frequency compatibility (50/60Hz), this motor is a cornerstone for domestic refrigerators and freezers. This comprehensive guide covers technical datasheets, electrical wiring, and professional replacement strategies for global cooling systems.

---

Mastering Domestic Refrigeration: The Technical Profile of the Huayi HYE69Y63 Compressor

In the precision-driven world of refrigeration engineering, the Huayi HYE69Y63 stands as a testament to reliable, small-scale thermal management. As a 1/5 horsepower unit optimized for Low Back Pressure (LBP) cycles, this compressor is a frequent choice for manufacturers of domestic refrigerators and light-duty freezers. Its ability to operate across both 50Hz and 60Hz frequencies makes it a versatile global component, capable of maintaining sub-zero temperatures with impressive volumetric efficiency.

Engineering Design and Performance

The HYE69Y63 utilizes a hermetic reciprocating mechanism, engineered to move R134a refrigerant with minimal mechanical friction. In the field, technicians value this model for its thermal protection systems and robust winding material, which ensure longevity even in high-ambient temperature environments. The “HYE” series from Huayi is recognized for its low noise profile and vibration-damping housing, making it ideal for residential kitchen appliances.

Technical Data and Specifications Table

Feature	Detailed Specification
Model	HYE69Y63
Utilisation (mbp/hbp/lbp)	LBP (Low Back Pressure)
Domaine (Freezing/Cooling)	Freezing / Deep Cold Storage
Oil Type and Quantity	POE (Ester Oil) – Approx. 180 ml
Horsepower (HP)	1/5 HP
Refrigerant Type	R134a
Power Supply	220-240VAC / 50-60Hz / 1 Phase
Cooling Capacity (ASHRAE)	168 Watts / 573 BTU/h (@ -23.3°C)
Motor Type	RSIR (Resistive Start – Inductive Run)
Displacement	6.9 cm³
Winding Material	High-Grade Copper
Pressure Charge	0.8 to 1.3 Bar (Evaporating Pressure)
Capillary Recommendation	0.031″ ID (Length dependent on cabinet)
Refrigerator Brands	Haier, Whirlpool, Midea, Hisense
Temperature Function	-35°C to -10°C (-31°F to 14°F)
Cooling System	Static (Natural Convection)
Commercial Class	Domestic / Residential
Amperage (FLA)	1.1 A to 1.3 A
LRA (Locked Rotor Amps)	12.0 A
Type of Relay	PTC (Positive Temperature Coefficient)
Capacitor Requirement	Generally none (Standard RSIR configuration)

---

Electrical Wiring Schema (RSIR Configuration)

Correct electrical connection is paramount for the safety of the hermetic motor. The terminal block of the HYE69Y63 follows the standard triangular pin layout:

Common (C): Located at the top of the triangle. This connects to the line supply through the Thermal Overload Protector.
Main/Run (M): Located at the bottom right. This winding remains energized throughout the cooling cycle.
Start (S): Located at the bottom left. This winding is energized momentarily via the PTC relay to initiate rotation.

Technician’s Insight: If the compressor fails to start but hums, check the resistance between C-M and C-S. A healthy motor will show a combined resistance across S-M that equals the sum of the two individual readings.

---

Comparative Performance Analysis

When comparing the HYE69Y63 against its industry peers, we see a focus on balancing displacement with energy consumption.

Metric	Huayi HYE69Y63 (R134a)	Standard 1/5 HP (R600a Equivalent)
Displacement	6.9 cm³	10.2 cm³
Operating Pressure	Positive (Standard)	Low / Near-Vacuum
Efficiency (COP)	1.30 W/W	1.50 W/W
Gas Charge Weight	Moderate (~120g)	Low (~50g)

---

Professional Replacement Cross-Reference

Finding a suitable replacement requires matching the BTU/h capacity and the displacement as closely as possible to maintain the refrigerator’s original duty cycle.

5 Compressor Replacements (R134a – Same Gas):

1. Embraco: EMT55HLP (High performance, near-identical BTU)
2. ACC / Cubigel: GL70AA (Robust European alternative)
3. GMCC: PE75H1C (Slightly higher displacement, very reliable)
4. Secop (Danfoss): PL50F (Compact design for limited spaces)
5. Tecumseh: FFI6HAK (Standard American replacement)

5 Compressor Replacements (R600a – Different Gas):
Note: Converting from R134a to R600a requires a complete system flush, oil replacement, and potentially a capillary tube adjustment.

1. TEE: NTU170MT
2. Cubigel: HMK12AA
3. Secop: HTK12AA
4. Huayi: HYB12MHU
5. Jiaxipera: NT1114Y

---

Field Engineering Advice and Notices

• Vacuum Standards: Because R134a systems use POE oil, they are highly sensitive to moisture. A deep vacuum of at least 500 microns is mandatory. Failure to achieve this will lead to acid formation, which destroys the motor windings over time.
• Thermal Protection: If the compressor “clicks” off frequently, ensure the condenser coils are clean. Static-cooled compressors like the HYE69Y63 rely on natural convection; dust buildup can cause the internal thermal protector to trip prematurely.
• Start Components: Always replace the PTC relay and the overload protector when installing a new compressor. A fatigued relay can cause the start winding to stay energized too long, leading to a catastrophic burnout of the new unit.
• Charging by Weight: For R134a, always charge using a digital scale to the exact weight specified on the refrigerator’s nameplate. Charging by “pressure feel” often leads to overcharging, which increases the stress on the 1/5 HP motor.

Conclusion and Practical Benefits

The Huayi HYE69Y63 is a resilient, mid-range compressor that provides a stable cooling solution for millions of households worldwide. For the engineer, it represents a standard “plug-and-play” solution for a wide variety of refrigeration brands. Its dual-frequency capability and high copper-content windings make it an exceptionally forgiving unit in regions where power grid stability may fluctuate.