
The ZMC GL45AN is a hermetic refrigeration compressor designed for domestic and light commercial refrigeration systems operating with R134a refrigerant. This model belongs to the LBP (Low Back Pressure) category and is widely used in refrigerators, beverage coolers, small freezers, and under-counter cooling equipment.
Engineered for reliability, low noise, and stable thermal performance, the GL45AN is well adapted for continuous duty cycles in temperature ranges typically found in cooling and light freezing systems. Its compact displacement and efficient motor design make it a common replacement compressor in service and maintenance operations.
The GL45AN operates using a single-phase RSIR motor system, optimized for energy efficiency and smooth start-up. It is oil-lubricated with mineral oil compatible with R134a, ensuring proper lubrication and long service life.
This compressor is designed to work without an external cooling fan, relying instead on natural air convection around the shell, which simplifies installation and reduces failure points.
| Parameter | Value |
|---|---|
| Model | ZMC GL45AN |
| Utilisation (MBP/HBP/LBP) | LBP |
| Domaine (Freezing / Cooling) | Cooling & Light Freezing |
| Oil Type & Quantity | Mineral Oil – approx. 180 ml |
| Horsepower (HP) | 1/8 HP |
| Refrigerant Type | R134a |
| Power Supply | 220–240V / 50Hz / 1 Phase |
| Cooling Capacity (BTU/h) | ~450–520 BTU/h |
| Motor Type | Single-Phase Induction (RSIR) |
| Displacement | ~4.5 cm³ |
| Winding Material | Copper |
| Pressure Charge | Factory nitrogen holding charge |
| Capillary Tube | 0.031″ – 0.036″ (system dependent) |
| Compatible Refrigerator Models | Single-door fridge, minibar, beverage cooler |
| Temperature Function | −30°C to −10°C evaporating |
| With Fan or No | No fan |
| Commercial Use | Yes (light commercial) |
| Amperage (Running) | 1.1 – 1.4 A |
| LRA (Locked Rotor Amps) | ~6.5 A |
| Relay Type | PTC Relay |
| Capacitor | Not required (RSIR design) |
The GL45AN uses a Resistance Start Induction Run configuration:
This configuration reduces component count and improves long-term reliability.
This compressor is suitable for:
It is not recommended for:
| Model | Refrigerant | HP | Displacement |
|---|---|---|---|
| ZMC GL45AN | R134a | 1/8 | 4.5 cc |
| Secop TLES5.7 | R134a | 1/6 | 5.7 cc |
| Embraco EM2X60 | R134a | 1/6 | 6.0 cc |
| Huayi HYE45 | R134a | 1/8 | 4.5 cc |
The GL45AN offers lower energy consumption compared to higher-displacement compressors, making it ideal where efficiency and compact size are required.
System oil, capillary, and dryer must be adapted.
Can the ZMC GL45AN be used in a freezer?
Yes, it can operate in light freezing applications down to approximately −30°C evaporating temperature, provided the system is correctly sized and ventilated.
ZMC GL45AN compressor R134a 1/8 HP LBP refrigeration compressor for refrigerator cooling and light freezing applications replacement guide
ZMC GL45AN Compressor R134a 1/8 HP | Technical Specs & Replacement Guide
Professional guide to the ZMC GL45AN compressor: R134a, 1/8 HP, LBP refrigeration use, specifications, replacements, applications, and expert installation advice.
zmc-gl45an-compressor-r134a-1-8hp
ZMC GL45AN, Compressor R134a, 1/8 HP Compressor, Refrigerator Compressor, Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, GL45AN replacement, Embraco replacement, Secop replacement
The ZMC GL45AN is a hermetic refrigeration compressor designed for R134a systems in cooling and light freezing applications. With a 1/8 HP motor, LBP operation, and RSIR electrical design, it delivers stable performance, low noise, and high reliability for domestic and light commercial refrigeration equipment.
