The Jiaxipera VMH1111Y is a high-efficiency variable-speed inverter compressor optimized for R600a refrigerant. Operating between 22Hz and 75Hz, it offers a 1/5 HP equivalent output, making it the preferred choice for premium Sharp and Toshiba…
| Feature | Details |
| Model | VMH1111Y |
| Utilisation | LBP (Low Back Pressure) |
| Domaine | Domestic Freezing / Deep Cooling |
| Cooling Wattage at -23.3°C | 156 W (at maximum frequency) |
| Cubic feet capacity | 18 – 22 cu.ft. (depending on insulation) |
| Litres capacity | 500 – 600 Liters |
| Kcal/h | 134 Kcal/h |
| Oil Type and Quantity | POE (Polyolester) / 220ml |
| Horsepower (HP) | 1/5 HP (Equivalent) |
| Refrigerant Type | R600a (Isobutane) |
| Power Supply | 230V ~ 22-75Hz (Inverter) |
| Cooling Capacity BTU | 532 BTU/h |
| Motor Type | BLDC (Brushless DC Motor) |
| Displacement | 11.1 $cm^3$ |
| Winding Material | High-Grade Copper |
| Pression Charge | 1.5 – 2.5 Bar (Low Side) |
| Capillary Recommendation | 0.031″ (0.78mm) x 3.0 meters |
| Compatible Refrigerators | Sharp, Toshiba, Panasonic High-End Inverter Models |
| Temperature Function | -35°C to -15°C |
| Fan Requirement | No (Static cooling, but fan improves efficiency) |
| Commercial Application | No (Domestic Premium) |
| Amperage in Function | 0.8A to 1.4A (Variable) |
| L.R.A (Locked Rotor Amps) | 4.5A (Electronic limited) |
| Type of Relay | Inverter Controller Module (Electronic Board) |
| Capacitor Included | Not applicable (Inverter controlled) |
| Country of Origin | China (Jiaxipera) / Exported Globally |
| Evaporating Temp (°C) | Cooling Capacity (Watts) | Power Consumption (Watts) | COP (W/W) |
| -35 | 82 | 68 | 1.20 |
| -30 | 110 | 80 | 1.37 |
| -25 | 142 | 92 | 1.54 |
| -23.3 | 156 | 98 | 1.59 |
| -20 | 185 | 108 | 1.71 |
| -15 | 230 | 125 | 1.84 |
| -10 | 285 | 145 | 1.96 |
| Feature | Jiaxipera VMH1111Y (Inverter) | Standard 1/5 HP (Fixed Speed) |
| Energy Consumption | Up to 40% lower | High (Cycle start-up peaks) |
| Noise Level | 35-38 dB | 42-45 dB |
| Temperature Swing | ±0.5°C | ±2.0°C |
| Refrigerant | R600a (Eco-friendly) | R134a (Older models) |
The Secop ES7FT.4 is a high-efficiency 1/5 HP hermetic compressor engineered for R134a LBP applications. With a displacement of 5.70 cm³ and a cooling capacity of 147W at -23.3°C, it is an ideal choice for…
| Attribute | Details |
| Model | ES7FT.4 (102G4707) |
| Utilisation | LBP (Low Back Pressure) |
| Domaine | Freezing / Deep Cooling |
| Cooling Wattage at -23.3°C | 147 Watts (CECOMAF) |
| Cubic Feet Capacity | Approx. 7 – 10 cu.ft |
| Liters Capacity | 200 – 300 Liters |
| Kcal/h | 126 kcal/h |
| Oil Type & Quantity | Polyolester (POE) / 180 cm³ |
| Horsepower (HP) | 1/5 HP |
| Refrigerant Type | R134a |
| Power Supply | 220-240V / 50Hz / 1Ph |
| Cooling Capacity BTU | 502 BTU/h |
| Motor Type | RSIR (Resistance Start – Induction Run) |
| Displacement | 5.70 cm³ |
| Winding Material | Copper |
| Pression Charge | Low Pressure Side |
| Capillary Recommendation | 0.031″ or 0.8mm (application dependent) |
| Appliance Type | Domestic Fridge, Chest Freezer, Water Dispenser |
| Temperature Function | -35°C to -10°C |
| Cooling System | Static (S) |
| Commercial Class | Semi-Commercial / Residential |
| Amperage (RLA) | 1.1 A |
| LRA (Locked Rotor Amps) | 5.4 A |
| Type of Relay | PTC Starter |
| Capacitor | N/A (RSIR Configuration) |
| Country of Origin | Slovakia |
| Evaporating Temp (°C) | Cooling Capacity (Watts) | Power Consumption (Watts) | COP (W/W) |
| -35 | 71.6 | 107 | 0.67 |
| -30 | 99.5 | 125 | 0.80 |
| -23.3 (Standard) | 147 | 148 | 0.99 |
| -20 | 176 | 160 | 1.10 |
| -15 | 228 | 179 | 1.27 |
| -10 | 290 | 200 | 1.45 |
The Secop TLES6FT.3 is a high-efficiency hermetic reciprocating compressor designed specifically for Low Back Pressure (LBP) applications. Operating on R134a refrigerant, this 1/6 HP powerhouse is a staple in domestic refrigeration. This guide breaks down…
| Feature | Specification |
| Model | TLES6FT.3 (102G 4609) |
| Utilization | LBP (Low Back Pressure) |
| Domaine | Freezing / Cooling |
| Horsepower (HP) | 1/6 HP |
| Refrigerant Type | R134a |
| Displacement | 6.00 cm³ |
| Cooling Capacity (-23.3°C ASHRAE) | 156 Watts (Approx. 532 BTU/h) |
| Power Supply | 220-240V / 50Hz / 1 Phase |
| Motor Type | RSIR/CSIR (LST/HST compatible) |
| Oil Type and Quantity | POE (Polyolester) / 180 ml |
| Winding Material | Copper |
| Amperage (Rated) | 1.1 A |
| LRA (Locked Rotor Amperage) | 7.5 A |
| Type of Relay | PTC or Current Relay |
| Capacitor | Optional (6 µF or 80 µF for HST) |
| Country of Origin | Slovakia |
| Evaporating Temp (°C) | Cooling Capacity (Watts) | Power Consumption (Watts) | COP (W/W) |
| -35 | 82 | 98 | 0.84 |
| -30 | 112 | 114 | 0.98 |
| -25 | 148 | 131 | 1.13 |
| -23.3 | 156 | 138 | 1.14 |
| -20 | 188 | 150 | 1.25 |
| -15 | 240 | 170 | 1.41 |
| -10 | 295 | 192 | 1.54 |
| Brand | Model | HP | Displacement | Gas |
| Secop | TLES6FT.3 | 1/6 HP | 6.00 cc | R134a |
| Embraco | EMT55HLP | 1/6 HP | 5.19 cc | R134a |
| Jiaxipera | ND1112Y | 1/6 HP | 5.80 cc | R134a |
| ACC/Seko | GVY57AA | 1/6 HP | 5.73 cc | R134a |
| Problem | Potential Cause | Action |
| Compressor runs but no cold | Gas leak or partial blockage | Check high-side pressure and capillary. |
| Clicking sound (Thermal Protector) | Faulty relay or seized piston | Check LRA and relay resistance. |
| High vibration | Worn internal springs | Ensure the external rubber grommets are intact. |
Choosing between the ZEL GQY80AT and Huaguang ATA72XL requires a deep understanding of displacement and cooling wattage. This professional guide breaks down the 198W capacity of the GQY80AT versus the 185W of the ATA72XL, providing…
| Model | ZEL GQY80AT | Huaguang ATA72XL |
| Utilization | LBP (Low Back Pressure) | LBP (Low Back Pressure) |
| Domaine | Freezing / Cooling | Freezing / Cooling |
| Cooling Wattage (-23.3°C) | 198 W | 185 W |
| Cubic Feet Capacity | 12 – 16 cu.ft. | 10 – 14 cu.ft. |
| Liters Capacity | 350 – 450 L | 280 – 400 L |
| Kcal/h | 170 kcal/h | 159 kcal/h |
| Oil Type & Quantity | POE (Ester) / 200ml | POE (Ester) / 180ml |
| Horsepower (HP) | 1/4 HP | 1/5 HP+ |
| Refrigerant Type | R134a | R134a |
| Power Supply | 200-220V / 50Hz | 220-240V / 50-60Hz |
| Cooling Capacity (BTU) | 676 BTU/h | 631 BTU/h |
| Motor Type | RSIR / RSCR | RSIR |
| Displacement | 8.1 cm³ | 7.2 cm³ |
| Winding Material | Copper | Copper |
| Pressure Charge | 0.5 – 0.8 Bar (Running) | 0.4 – 0.7 Bar (Running) |
| Capillary Size | 0.031″ / 3.0m | 0.028″ / 3.0m |
| Temperature Function | -35°C to -10°C | -30°C to -10°C |
| Cooling Method | Static (No Fan) | Static (No Fan) |
| Commercial Use | Light Commercial/Domestic | Domestic |
| Amperage (FLA) | 1.3 A | 1.1 A |
| LRA (Locked Rotor) | 12 A | 10 A |
| Relay Type | PTC | PTC |
| Capacitor | Optional (4-5uF) | No |
| Origin | China (Zanussi Tech) | China (Wanbao) |
| Evaporating Temp (°C) | Cooling Capacity (Watts) | Power Consumption (Watts) | COP (W/W) |
| -30 | 145 | 125 | 1.16 |
| -25 | 182 | 148 | 1.23 |
| -23.3 (Standard) | 198 | 155 | 1.27 |
| -20 | 235 | 170 | 1.38 |
| -15 | 305 | 195 | 1.56 |
| -10 | 390 | 220 | 1.77 |
The Donper LG83WZ1 stands as a cornerstone in modern domestic and light commercial refrigeration. Engineered for Low Back Pressure applications, this R134a-driven unit provides reliable cooling capacity for medium to large refrigerators. Its 8.3cc displacement…
| Feature | Specification |
| Model | LG83WZ1 |
| Utilization | LBP (Low Back Pressure) |
| Domaine | Freezing / Deep Cooling |
| Cooling Wattage at -23.3°C | 230 W |
| Cubic Feet Capacity | 14 – 18 cu.ft. |
| Liters Capacity | 400 – 500 Liters |
| Kcal/h | 198 Kcal/h |
| Oil Type and Quantity | Ester Oil (POE) / 180ml |
| Horsepower (HP) | 1/4 HP+ |
| Refrigerant Type | R134a |
| Power Supply | 220–240V / 50Hz / 1Ph |
| Cooling Capacity (BTU/h) | 785 BTU/h |
| Motor Type | RSIR / RSCR (depending on start kit) |
| Displacement | 8.3 cm³ |
| Winding Material | High-Grade Copper |
| Suction Pressure Charge | 0.5 to 1.2 Bar (system dependent) |
| Capillary Recommendation | 0.031″ or 0.036″ ID |
| Common Application | Double-door refrigerators, Chest Freezers |
| Temperature Function | -35°C to -15°C |
| Cooling Method | Static or Fan Assisted |
| Commercial Status | Semi-Commercial / Residential |
| Amperage (FLA) | 1.4 A |
| LRA (Locked Rotor Amps) | 11.5 A |
| Relay Type | PTC or Magnetic |
| Start Capacitor | Optional (usually 60-80 µF if used) |
| Origin | China (Global Export) |
| Evaporating Temp (°C) | Cooling Capacity (Watts) | Power Consumption (Watts) | COP (W/W) |
| -30 | 165 | 148 | 1.11 |
| -25 | 215 | 165 | 1.30 |
| -23.3 (ASHRAE) | 230 | 172 | 1.34 |
| -20 | 275 | 185 | 1.48 |
| -15 | 345 | 205 | 1.68 |
| -10 | 430 | 230 | 1.87 |
| Brand | Model | HP Equivalent | Displacement |
| Embraco | FFI8.5HAK | 1/4 HP+ | 8.5 cm³ |
| Secop | NLE8.8MF | 1/3 HP | 8.8 cm³ |
| LG | MA88LAEP | 1/4 HP+ | 8.8 cm³ |
| Panasonic | QB86C16GAX5 | 1/4 HP+ | 8.6 cm³ |
| Tecumseh | THG1374YS | 1/4 HP | 7.4 cm³ |
The Secop TLES6FT.3 is a cornerstone of modern domestic refrigeration. This 1/5 HP, R134a compressor is engineered in Slovakia for Low Back Pressure applications, offering a cooling capacity of 149W. Known for its quiet operation…
| Feature | Specification |
| Model | TLES6FT.3 |
| Utilisation | LBP (Low Back Pressure) |
| Domaine | Freezing / Cooling |
| Cooling Wattage (-23.3°C) | 149 Watts (ASHRAE) |
| Cooling Capacity (BTU/h) | 508 BTU/h |
| Cubic Feet Capacity | Approx. 7 to 9.5 cu. ft. |
| Liters Capacity | 200 – 270 Liters |
| Kcal/h | 128 Kcal/h |
| Oil Type and Quantity | POE (Polyolester) / 180 ml |
| Horsepower (HP) | 1/5 HP |
| Refrigerant Type | R134a |
| Power Supply | 220-240V / 50Hz / 1 Phase |
| Motor Type | RSIR/CSIR (Depending on Starter) |
| Displacement | 5.70 cm³ |
| Winding Material | Copper |
| Pressure Charge | Low Pressure (Suction Side) |
| Capillary Tube (Suggested) | 0.031″ ID x 3 meters (Approx.) |
| Appliance Type | Refrigerators, Deep Freezers |
| Operating Temp Range | -35°C to -10°C |
| Cooling Method | Static (No Fan Required) |
| Commercial Class | Domestic / Light Commercial |
| Amperage (RLA) | 0.95 A – 1.1 A |
| Locked Rotor Amps (LRA) | 7.5 A |
| Start Relay | PTC or Electromagnetic |
| Run Capacitor | Optional (usually not required for RSIR) |
| Country of Origin | Slovakia |
| Evaporating Temp (°C) | Cooling Capacity (Watts) | Power Consumption (Watts) | COP (W/W) |
| -35 | 82 | 88 | 0.93 |
| -30 | 110 | 102 | 1.08 |
| -23.3 (Standard) | 149 | 122 | 1.22 |
| -20 | 172 | 134 | 1.28 |
| -15 | 215 | 150 | 1.43 |
| -10 | 268 | 168 | 1.60 |
The Siberia GFF57AA is a high-performance 1/5 HP hermetic reciprocating compressor designed for Low Back Pressure (LBP) applications. Utilizing R134a refrigerant and a 5.7cc displacement, it provides a reliable cooling capacity of 166W. This unit…
| Feature | Specification |
| Model | GFF57AA (Siberia / Bingfeng) |
| Utilization | LBP (Low Back Pressure) |
| Field of Application | Freezing and Deep Cooling |
| Oil Type and Quantity | Ester Oil (POE), 180ml – 200ml |
| Horsepower (HP) | 1/5 HP |
| Refrigerant Type | R134a |
| Power Supply | 220-240V ~ 50Hz |
| Cooling Capacity | 166 W / 566 BTU/h (ASHRAE) |
| Motor Type | RSIR (Resistive Start, Inductive Run) |
| Displacement | 5.70 cm³ |
| Winding Material | Copper/Aluminum Alloy (Model specific) |
| Charge Pressure (Low Side) | 0.5 to 1.5 PSI (Running) |
| Capillary Tube Recommendation | 0.031″ ID (approx. 2.5m – 3m based on application) |
| Compatible Equipment | Domestic Refrigerators, Chest Freezers, Water Dispensers |
| Evaporating Temperature Range | -35°C to -15°C (-31°F to 5°F) |
| Cooling Method | Static Cooling (No fan required for compressor body) |
| Commercial Classification | Residential / Light Commercial |
| Operating Amperage | 1.1 A to 1.3 A |
| LRA (Locked Rotor Amps) | 8.5 A |
| Type of Relay | PTC Start Relay |
| Capacitor Requirement | Usually None (RSIR); Optional 4µF-5µF for Efficiency |
Finding the perfect heart for your 2012 Kiriazi refrigerator requires precision. The ZMC GL80AA 1/5 HP compressor is the definitive OEM standard, offering the perfect balance of cooling capacity and durability for 14ft cabinets. We…
| Feature | Specification |
| Model | ZMC GL80AA (ACC/Cubigel Equivalent) |
| Utilisation (mbp/hbp/lbp) | LBP (Low Back Pressure) |
| Domaine | Cooling & Freezing (Domestic) |
| Cooling wattage at -23.3°C | 144 W (approx. 124 kcal/h) |
| Cubic feet can this compressor cool? | 12 to 14 ft³ (Ideal for K335/K350 models) |
| Litres can this compressor cool? | 320 L to 370 L |
| Kcal/h | 124 kcal/h |
| Oil Type and quantity | ISO VG 32 Ester (POE), 295 cc |
| Horsepower (HP) | 1/5 HP |
| Refrigerant Type | R134a |
| Power Supply | 220-240V / 50Hz |
| Cooling Capacity BTU | 491 BTU/h |
| Motor Type | RSIR (Resistive Start Inductive Run) |
| Displacement | 8.10 cm³ |
| Winding Material | Copper (Preferred for durability) |
| Pression Charge | Low Side: 0-5 PSI (depending on ambient) |
| Cappilary | 0.031″ x 3.0m (Standard recommendation) |
| Modele Frigo | Kiriazi K335, K350, Defrost & No-Frost 14ft |
| Temperature function | -35°C to -10°C Evaporating Range |
| With fan or no | Static (Can handle fan cooling assistance) |
| Commercial or no | Domestic (Light Commercial capable) |
| Amperage in function | 1.08 A – 1.15 A (Rated Load) |
| LRA (Locked Rotor Amps) | 11.5 A |
| Type of relay | PTC (Positive Temperature Coefficient) |
| Capacitor | Optional (Run Cap not std, Start Cap rare for RSIR) |
| Country of origin | Egypt / Italy / Spain (Depending on brand license) |
| Evaporating Temp (°C) | Cooling Capacity (Watts) | Power Consumption (Watts) | Efficiency (COP W/W) |
| -35 | 95 | 115 | 0.82 |
| -30 | 118 | 132 | 0.89 |
| -25 | 145 | 150 | 0.96 |
| -23.3 | 155 | 162 | 0.95 |
| -20 | 175 | 170 | 1.03 |
| -15 | 225 | 195 | 1.15 |
| -10 | 280 | 220 | 1.27 |
| 0 | N/A | N/A | N/A |
| 4 | N/A | N/A | N/A |
| 10 | N/A | N/A | N/A |
This technical guide explores the Samsung RT47CB663222 refrigerator, a high-efficiency 460-liter unit utilizing R-600a refrigerant. Operating on a 220-240V 50Hz supply, this inverter-driven system is designed for Low Back Pressure applications. We break down the…
| Feature | Details |
| Model | RT47CB663222 |
| Utilisation | LBP (Low Back Pressure) |
| Domaine | Freezing / Cooling (Dual Zone) |
| Cooling Wattage at -23.3°C | Approx. 165 – 175 W |
| Cubic Feet Capacity | 16.8 cu.ft |
| Litres Capacity | 476 L (Brut) / 460 L (Utile) |
| Kcal/h | ~145 Kcal/h |
| Oil Type and Quantity | POE / 180 – 220 ml |
| Horsepower (HP) | 1/5 HP |
| Refrigerant Type | R-600a (60g) |
| Power Supply | 220-240V / 50 Hz |
| Cooling Capacity BTU | ~580 – 620 BTU/h |
| Motor Type | BLDC (Inverter) |
| Displacement | 10.0 to 12.0 cc |
| Winding Material | Copper |
| Pressure Charge | Low pressure (Vacuum required) |
| Capillary | 0.028″ or 0.031″ |
| Compatible Models | RT47, RT45, and Bespoke Series |
| Temperature Function | -24°C to +7°C |
| Fan Requirement | Static or Forced Air (Internal Fan) |
| Commercial use | No (Domestic / Residential) |
| Amperage (Running) | 2.0 A (Total system max) |
| LRA | 4.5 – 6.0 A |
| Relay Type | Inverter Control Board |
| Capacitor | 4µF to 6µF (Run capacitor on board) |
| Country of Origin | Thailand |
| Evaporating Temp (°C) | Cooling Capacity (Watts) | Power Consumption (Watts) | COP (W/W) |
| -30 | 115 | 110 | 1.05 |
| -25 | 155 | 135 | 1.15 |
| -23.3 (LBP Point) | 172 | 145 | 1.19 |
| -20 | 205 | 160 | 1.28 |
| -15 | 260 | 185 | 1.41 |
| -10 | 330 | 215 | 1.53 |
The ZMC GL90TB is a high-performance 1/4 HP compressor designed for High Back Pressure (HBP) commercial refrigeration. Operating on R134a with a 220-240V supply, it offers a cooling capacity of approximately 2800 BTU/h. This article…
| Feature | Specification |
| Model | GL90TB |
| Utilisation | HBP (High Back Pressure) |
| Domaine | Cooling / Refrigeration (Commercial) |
| Cooling wattage at -23.3°C | Approx. 330W (LBP) / 820W (HBP @ +7.2°C) |
| Cubic feet capacity | 12 – 18 cu.ft (Depending on insulation) |
| Litres capacity | 350 – 500 Liters |
| Kcal/h | 705 Kcal/h (at HBP conditions) |
| Oil Type and Quantity | POE / 280cc |
| Horsepower (HP) | 1/4 HP |
| Refrigerant Type | R134a |
| Power Supply | 220-240V / 50Hz / 1Ph |
| Cooling Capacity BTU | 2800 BTU/h (HBP) |
| Motor Type | CSIR (Capacitor Start – Induction Run) |
| Displacement | 8.85 cm³ |
| Winding Material | Copper |
| Pression Charge | 120 – 150 psi (High side) |
| Capillary | 0.042″ or 0.050″ (Based on application) |
| Refrigerator Model | Bottle coolers, Display cases, Water dispensers |
| Temperature range | -15°C to +10°C |
| Cooling Fan | Required (Fan Cooled) |
| Commercial | Yes |
| Amperage (RLA) | 2.1 A |
| LRA (Locked Rotor Amps) | 13.5 A |
| Type of Relay | Current Relay / Potential Relay |
| Capacitor | Start Capacitor (60-80 µF) |
| Country of Origin | Egypt (ZMC Production) |
| Evaporating Temp (°C) | Cooling Capacity (Watts) | Power Consumption (Watts) | COP (W/W) |
| -15 | 385 | 285 | 1.35 |
| -10 | 480 | 310 | 1.55 |
| -5 | 590 | 335 | 1.76 |
| 0 | 720 | 360 | 2.00 |
| +5 | 870 | 385 | 2.26 |
| +7.2 | 940 | 400 | 2.35 |
| +10 | 1040 | 415 | 2.51 |
