Mbsmpro.com, Compressor, Secop, TLES6FT.3, 1/5 HP, R134a, Cooling, 149 W, 1.1 A, 1Ph 220-240V 50Hz, LBP, RSIR/CSIR, Slovakian Engineering

---

When it comes to domestic refrigeration, few names carry as much weight as Secop. Formerly known under the Danfoss brand, these Slovakian-made powerhouses have become the backbone of reliable household cooling. Today, we’re breaking down the TLES6FT.3, a Low Back Pressure (LBP) compressor designed for efficiency and long-term durability in R134a systems.

If you’re a technician in the field, you know that the TLES series is prized for its compact footprint and low noise levels. It’s a “set it and forget it” component that handles the rigorous demands of modern energy standards without breaking a sweat.

---

Technical Data & Performance Specifications

The following data provides a granular look at the mechanical and electrical heart of this unit.

Feature	Specification
Model	TLES6FT.3
Utilisation	LBP (Low Back Pressure)
Domaine	Freezing / Cooling
Cooling Wattage (-23.3°C)	149 Watts (ASHRAE)
Cooling Capacity (BTU/h)	508 BTU/h
Cubic Feet Capacity	Approx. 7 to 9.5 cu. ft.
Liters Capacity	200 – 270 Liters
Kcal/h	128 Kcal/h
Oil Type and Quantity	POE (Polyolester) / 180 ml
Horsepower (HP)	1/5 HP
Refrigerant Type	R134a
Power Supply	220-240V / 50Hz / 1 Phase
Motor Type	RSIR/CSIR (Depending on Starter)
Displacement	5.70 cm³
Winding Material	Copper
Pressure Charge	Low Pressure (Suction Side)
Capillary Tube (Suggested)	0.031″ ID x 3 meters (Approx.)
Appliance Type	Refrigerators, Deep Freezers
Operating Temp Range	-35°C to -10°C
Cooling Method	Static (No Fan Required)
Commercial Class	Domestic / Light Commercial
Amperage (RLA)	0.95 A – 1.1 A
Locked Rotor Amps (LRA)	7.5 A
Start Relay	PTC or Electromagnetic
Run Capacitor	Optional (usually not required for RSIR)
Country of Origin	Slovakia

---

Efficiency Metrics (COP) & Performance Curve

Efficiency is where the TLES6FT.3 truly shines. The Coefficient of Performance (COP) varies based on the evaporating temperature. Use this table for precise diagnostics during system charging.

Evaporating Temp (°C)	Cooling Capacity (Watts)	Power Consumption (Watts)	COP (W/W)
-35	82	88	0.93
-30	110	102	1.08
-23.3 (Standard)	149	122	1.22
-20	172	134	1.28
-15	215	150	1.43
-10	268	168	1.60

---

Wiring & Connection Schematic

For the electrics, the TLES6FT.3 utilizes a standard triangular pin configuration. Proper wiring is essential to prevent winding burnout.

• Common (C): Top Pin.
• Run (R): Bottom Right Pin.
• Start (S): Bottom Left Pin.
• Logic: The PTC starter bridges the Start and Run windings briefly to initiate rotation. If using a CSIR setup, a start capacitor (usually 60-80 µF) is placed in series with the start winding.

---

Cross-Reference & Replacement Guide

If the TLES6FT.3 is unavailable, these alternatives offer similar displacement and BTU output.

Direct R134a Replacements (Same Gas)

1. Embraco: EMS 55 HLC / EMYe 70 CLP
2. ZMC/Zem: GL60AA
3. ACC / Cubigel: GVY57AA
4. Huayi: HYE60MT
5. Tecumseh: THB1355Y

R600a Conversion Alternatives (Requires System Flush)

Note: Converting from R134a to R600a requires a complete change of the capillary tube and filter drier.

1. Secop: TLY5.7KK.3
2. Embraco: EMX55CLC
3. Jiaxipera: T1114Y
4. Sikap: HMK95AA
5. Donper: L72CZ1

---

Expert Insight: Installation & Maintenance Notice

As a field engineer, I’ve seen these units last 15+ years when installed correctly. The TLES6FT.3 is a “high-tolerance” unit, but it is sensitive to moisture. Because it uses POE oil, which is highly hygroscopic (absorbs water), you must keep the system sealed until the very moment of brazing.

• Pro-Tip: Always replace the filter drier when swapping this compressor. A 15g or 20g drier is standard for this capacity.
• Vacuuming: Do not skip the vacuum stage. A minimum of 250 microns is recommended to ensure the POE oil remains stable.
• Charging: Charge by weight according to the refrigerator manufacturer’s label. Overcharging R134a systems will lead to high head pressure and premature valve failure.

---

Focus Keyphrase

Secop TLES6FT.3 R134a 1/5 HP LBP Compressor Specifications and Replacement Guide

SEO Title

Mbsmpro.com | Secop TLES6FT.3 Compressor | 1/5 HP | R134a | LBP Guide

Meta Description

Get the technical specs for the Secop TLES6FT.3 compressor. 1/5 HP, R134a, 149W cooling capacity. Includes wiring diagrams, replacement cross-references, and expert COP tables.

Slug

secop-tles6ft-3-compressor-r134a-1-5hp-specs

Tags

Secop, TLES6FT.3, R134a, 1/5 HP, Compressor, Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Slovakia, LBP, EMS55HLC, GL60AA, GVY57AA, HYE60MT, THB1355Y, Refrigeration Repair, Danfoss Compressor

Excerpt

The Secop TLES6FT.3 is a cornerstone of modern domestic refrigeration. This 1/5 HP, R134a compressor is engineered in Slovakia for Low Back Pressure applications, offering a cooling capacity of 149W. Known for its quiet operation and energy efficiency, it is the ideal choice for medium-sized refrigerators and deep freezers looking for long-term reliability.

Yes, your conclusion regarding the compressor ports is correct based on the standard design for this category:

Pipe 1 (single top pipe): This is the discharge line, usually the thinner pipe.

Pipe 2 (opposite the discharge): This is the suction line, which has a slightly larger diameter.

Pipe 3 (next to the suction): This is the process/service line, used for charging the gas.

---

Mbsmpro.com, Compressor, QD65H, 1/6 hp, Comptek, Cooling, R134a, 160 W, 1.2 A, 1Ph 220-240V 50Hz, L/MBP, RSIR, -35°C to -5°C, Cooling and Freezing

The refrigeration industry relies heavily on the “heart” of the system: the compressor. Among the most versatile and durable options available for domestic and light commercial applications is the Comptek QD65H. This piston-driven reciprocating compressor is engineered for reliability, specifically designed to handle the thermal demands of Low and Medium Back Pressure (L/MBP) environments.

Technical Specifications and Performance Data

The QD65H operates on the R134a refrigerant, a global standard for domestic cooling due to its thermodynamic efficiency and safety profile. Below is the comprehensive technical breakdown:

Feature	Specification
Model	QD65H (HM Series)
Horsepower (HP)	1/6 HP
Displacement	6.5 $cm^3$
Cooling Capacity (BTU/h)	546 BTU/h
Cooling Wattage (-23.3°C)	160 W
Motor Type	RSIR (Resistive Start – Induction Run)
Winding Material	High-grade Copper
Refrigerant Type	R134a
Power Supply	220-240V / 50Hz (1 Phase)
Oil Type and Quantity	POE/Mineral (approx. 180ml – 200ml)
Current (Running)	1.1 A – 1.2 A
LRA (Locked Rotor Amps)	6.5 A
Cooling Method	Static (Natural cooling, no fan required for compressor)

Efficiency Metrics (COP) and Performance Curve

Understanding the Coefficient of Performance (COP) is vital for energy management. The QD65H shows excellent stability across a wide range of evaporating temperatures.

Evaporating Temp (°C)	Cooling Capacity (Watts)	Power Consumption (Watts)	COP (W/W)
-30	110	102	1.07
-25	142	118	1.20
-23.3 (Standard)	160	125	1.28
-20	185	134	1.38
-15	230	148	1.55
-10	285	162	1.76
0	410	190	2.15

Application and Capability

This compressor is the “workhorse” for medium-sized household appliances. It is ideally suited for:

• Capacity in Liters: Efficiently cools units between 180 to 250 Liters.
• Capacity in Cubic Feet: Approximately 6.3 to 8.8 $ft^3$.
• Appliance Types: Single-door refrigerators, small chest freezers, and water dispensers.

Comparison: QD65H vs. Similar Models

Model	HP Rating	Displacement	Refrigerant	Application
Comptek QD65H	1/6 HP	6.5 $cm^3$	R134a	L/MBP (Versatile)
ZMC GM70AZ	1/5 HP	7.0 $cm^3$	R134a	LBP (Stronger Cooling)
Danfoss TLS6F	1/6 HP	5.7 $cm^3$	R134a	LBP (High Efficiency)

Professional Recommendations and Installation Notes

1. Capillary Tube Selection: For R134a systems using the QD65H, a capillary tube of 0.031 inches (0.8mm) with a length of 3 meters is standard for LBP freezing applications.
2. Vacuum Procedure: Always ensure a vacuum level of at least 500 microns to prevent moisture from reacting with the R134a oil.
3. Thermal Protection: The QD65H features an internal or external protector. Ensure the relay (PTC type) is seated correctly to prevent winding burnout.
4. Start Capacitor: While being an RSIR motor, in areas with unstable voltage, adding a 47-64µF start capacitor can assist in high-torque starts (HST).

---

Replacement Guide (Equivalents)

Same Refrigerant (R134a):

1. Embraco: EMS 55HLC
2. Danfoss/Secop: TLES6.5FT.3
3. Huayi: HYE69MT
4. Zanussi: GVY66AA
5. Tecumseh: THB1355Y

Alternative Refrigerant (R600a/R12/Other):

Note: Requires system flush and oil check.

1. QD65Y (R600a version)
2. Embraco: EMX55CLC (R600a)
3. Danfoss: TLES7.5KK.3 (R600a)
4. GL60AA (R134a alternative)
5. Zel: GQD65Y

---

Focus Keyphrase: Comptek QD65H Compressor 1/6 HP R134a L/MBP Technical Specifications and Replacement Guide

SEO Title: Mbsmpro.com | Comptek QD65H Compressor | 1/6 HP | R134a | L/MBP Specifications

Meta Description: Discover the full technical data for the Comptek QD65H 1/6 HP compressor. Includes cooling capacity (160W), COP tables, R134a gas specs, and 10 cross-reference replacement models for refrigerators and freezers.

Slug: comptek-qd65h-compressor-1-6hp-r134a-specs

Tags: Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, QD65H, Comptek, R134a Compressor, 1/6 HP Compressor, EMS 55HLC, TLES6.5FT.3, HYE69MT, GVY66AA, THB1355Y, Refrigeration Repair, LBP Compressor.

Excerpt: The Comptek QD65H is a high-performance 1/6 HP reciprocating compressor designed for R134a systems. Ideal for refrigerators between 180 and 250 liters, it offers a cooling capacity of 160W at -23.3°C. This professional guide covers its electrical characteristics, COP efficiency metrics, and provides a comprehensive list of equivalent models for seamless field replacement.