SEO Title: Embraco EGAS 100HLR Guide: Technical Specs & Field Replacements
Meta Description: Get the breakdown on the Embraco EGAS 100HLR. We cover LRA, R134a specs, displacement, and the best drop-in replacements for this common LBP workhorse.
Excerpt: The Embraco EGAS 100HLR is a staple in domestic refrigeration. This guide provides the raw technical data and equivalent models for fast field swaps.
Field Introduction
You’ll run into the Embraco EGAS 100HLR mostly in standard household refrigerators and large upright freezers. It’s a reliable Low Back Pressure (LBP) unit built for R134a. When these fail, it’s usually a hard start issue or a grounded winding after years of heat cycles. It’s a straightforward swap, but you need to match the displacement and LRA to keep the system balanced.
Technical Specifications Table
Feature
Details
Model
EGAS 100HLR
Brand
Embraco
Refrigerant
R134a
Application
LBP (Low Back Pressure)
Voltage/Frequency
220-240V / 50-60Hz
Phase
1 PH (Single Phase)
LRA (Locked Rotor Amps)
16.9 A (at 60Hz) / 16.0 A (at 50Hz)
Horsepower (HP)
~1/3 HP
Displacement
7.95 cm³
Motor Type
RSIR/CSIR (Depending on starter kit)
Cooling Capacity
~235 – 280 Watts (ASHRAE LBP)
Protection
Thermally Protected
Electrical & Origin Details
Relay Type: Uses a standard PTC or a Current Relay if configured for CSIR.
Capacitor Needs: Usually runs fine without a run capacitor (RSIR), but a start capacitor (approx. 60-80 µF) is often added for high-torque starts.
Manufacturing Origin: Joinville, Brazil (as seen on the nameplate).
Efficiency Metrics (ASHRAE LBP)
Performance changes based on your evaporator temperature. Here’s what to expect:
Evaporating Temp (°C)
Cooling Capacity (Watts)
Power Consumption (Watts)
COP (W/W)
-35
130
145
0.90
-30
185
170
1.09
-25
240
195
1.23
-23.3
265
205
1.29
-20
310
225
1.38
-15
390
255
1.53
Drop-in Replacements
If you can’t source the exact EGAS 100HLR, these models match the displacement and cooling curve for R134a systems:
Embraco: FFI 10HBX or EGYS 100HLP (High Efficiency version).
Secop/Danfoss: TLES10KK.3 or NLE10KK (Ensure R134a compatibility).
Jiaxipera: N1114GZ.
GMCC: SZ90E1H.
Huayi: HYE96YG.
Tecumseh: THG1374YS.
Field Note: Always replace the filter drier and pull a deep vacuum to 500 microns before charging R134a. This model uses POE oil; don’t leave the system open to the atmosphere for longer than necessary.
Huayi HYB35YG (Budget-friendly alternative, Chinese manufacture)
5 Replacements (Other Gas – R600a/R290)
Note: Requires complete system flush and expansion valve/capillary adjustment.
Embraco EG60HLC (R600a – Isobutane, very efficient)
Danfoss SC10CNX (R290 – Propane, modern refrigerant)
Panasonic NR series (R600a – Direct manufacturer alternative)
Secop NL5FT-R600a (R600a conversion variant)
Tecumseh THB4510Z (R600a – High efficiency)
SEO Information
Focus Keyphrase: Panasonic SFH39C73H Compressor Specs and Replacements
SEO Title: Mbsm.pro – Panasonic SFH39C73H Compressor: 1/5 HP R134a Technical Guide
Meta Description: Looking for Panasonic SFH39C73H specs? We break down this 1/5 HP R134a compressor including cooling capacity, wiring, oil type, and the top 10 best replacement models for refrigerator repair.
Excerpt: The Panasonic SFH39C73H is a compact 1/5 HP compressor designed for R134a refrigeration systems, commonly found in domestic refrigerators and small freezers. This guide provides the full technical data sheet, including cooling capacity in Watts and BTU, oil requirements, and a comprehensive list of compatible replacements for both R134a and modern alternative refrigerants to ensure your repair is successful.
Note: Requires complete system flush and expansion valve/capillary adjustment.
Embraco EGU80HLP (R600a – Isobutane, very efficient, 1/6 HP)
Danfoss SC10CNX (R290 – Propane, high efficiency)
Tecumseh CAJ9480Z (R404A – Higher capacity)
Secop NL9FK (R600a compatible variant)
Cubigel HM80AA (R600a – Energy efficient)
Key Features
Thermally protected compressor
Designed for Low Back Pressure (LBP) applications
Suitable for domestic refrigerators up to 280L capacity
RSIR motor type with PTC relay starting
Evaporating temperature range: -25°C to +10°C
Manufactured in China with RoHS compliance
Energy efficient with COP of 1.25
Low noise and vibration operation
Wide voltage range compatibility (187-254V)
Focus Keyphrase: Donper L65CZ1 Compressor Specs and Replacements
SEO Title: Mbsm.pro – Donper L65CZ1 Compressor: 1/5 HP R134a Technical Guide
Meta Description: Looking for L65CZ1 specs? We break down this 1/5 HP R134a Donper compressor including cooling capacity (158-170W), wiring, oil type, and the top replacement models for domestic refrigeration.
Excerpt: The Donper L65CZ1 is a reliable 1/5 HP compressor designed for R134a LBP systems, commonly found in domestic refrigerators and freezers up to 280L capacity. This guide provides the full technical data sheet, including cooling capacity (158-170W at ASHRAE), oil requirements (280-320ml), and a comprehensive list of compatible replacements for both R134a and modern alternative refrigerants to ensure your repair is successful.
Note: Requires complete system flush and expansion valve/capillary adjustment.
Embraco EGU80HLP (R600a – Isobutane, very efficient, 1/6 HP)
Danfoss SC10CNX (R290 – Propane, high efficiency)
Tecumseh CAJ9480Z (R404A – Higher capacity)
Secop NL9FK (R600a compatible variant)
Cubigel HM60AA (R600a – Energy efficient)
Key Features
Thermally protected compressor
Designed for Low Back Pressure (LBP) applications
Suitable for domestic refrigerators up to 250L capacity
RSCR motor type for improved efficiency
Evaporating temperature range: -35°C to -5°C
Manufactured in Singapore with Panasonic quality standards
Energy efficient with COP of 1.35 okmarts.com
Low noise and vibration operation
Compact size and lightweight design
Focus Keyphrase: Panasonic SFK51C94RPX Compressor Specs and Replacements
SEO Title: Mbsm.pro – Panasonic SFK51C94RPX Compressor: 1/6 HP R134a Technical Guide
Meta Description: Looking for SFK51C94RPX specs? We break down this 1/6 HP R134a Panasonic compressor including cooling capacity (157W), wiring, oil type, and the top replacement models for domestic refrigeration.
Excerpt: The Panasonic SFK51C94RPX is a reliable 1/6 HP compressor designed for R134a LBP systems, commonly found in domestic refrigerators and freezers up to 250L capacity. This guide provides the full technical data sheet, including cooling capacity (157W at ASHRAE), oil requirements (280-320ml), and a comprehensive list of compatible replacements for both R134a and modern alternative refrigerants to ensure your repair is successful.
Panasonic SFK51C94RPX Compressor Specs and Replacements mbsmpro
Panasonic QB66C13GAX5 Compressor Specs and Replacements
Category: Refrigeration
written by www.mbsmpro.com | March 7, 2026
R134a, refrigerant, compressor QB66C13GAX5, 220V 50Hz, LBP, 1/5 hp
Note: Requires complete system flush and expansion valve/capillary adjustment.
Embraco EGU80HLP (R600a – Isobutane, very efficient, 1/6 HP)
Danfoss SC10CNX (R290 – Propane, high efficiency)
Tecumseh CAJ9480Z (R404A – Higher capacity)
Secop NL9FK (R600a compatible variant)
Cubigel HM80AA (R600a – Energy efficient)
Key Features
Thermally protected compressor www.mbsm.pro
Designed for Low Back Pressure (LBP) applications okmarts.com
Suitable for domestic refrigerators up to 250L capacity www.mbsm.pro
RSIR motor type with PTC relay starting okmarts.com
Evaporating temperature range: -35°C to -5°C www.aspneumatic.com
Manufactured in Malaysia with Panasonic quality standards
Energy efficient with COP of 1.19-1.23 www.scribd.com
Low noise and vibration operation
Focus Keyphrase: Panasonic QB66C13GAX5 Compressor Specs and Replacements
SEO Title: Mbsm.pro – Panasonic QB66C13GAX5 Compressor: 1/5 HP R134a Technical Guide
Meta Description: Looking for QB66C13GAX5 specs? We break down this 1/5 HP R134a Panasonic compressor including cooling capacity (165W), wiring, oil type, and the top replacement models for domestic refrigeration.
Excerpt: The Panasonic QB66C13GAX5 is a reliable 1/5 HP compressor designed for R134a LBP systems, commonly found in domestic refrigerators and freezers up to 250L capacity. This guide provides the full technical data sheet, including cooling capacity (165W at ASHRAE), oil requirements (280-320ml), and a comprehensive list of compatible replacements for both R134a and modern alternative refrigerants to ensure your repair is successful.
Note: Requires complete system flush and expansion valve/capillary adjustment.
Embraco EGU90HLP (R600a – Isobutane, very efficient, 1/5 HP)
Danfoss SC10CNX (R290 – Propane, high efficiency)
Tecumseh CAJ9480Z (R404A – Higher capacity)
Secop NL11FK (R600a compatible variant)
Cubigel HM90AA (R600a – Energy efficient)
Focus Keyphrase: SUB COOL GQR80TG Compressor Specs and Replacements
SEO Title: Mbsm.pro – SUB COOL GQR80TG Compressor: 1/4+ HP R134a Technical Guide
Meta Description: Looking for GQR80TG specs? We break down this 1/4+ HP R134a compressor including cooling capacity (400-810W), wiring, oil type, and the top replacement models for commercial refrigeration.
Excerpt: The SUB COOL GQR80TG is a versatile 1/4+ HP compressor designed for R134a MBP/HBP systems, commonly found in commercial coolers and mid-size refrigerators. This guide provides the full technical data sheet, including cooling capacity (400W to 810W depending on conditions), oil requirements (380-420ml POE), and a comprehensive list of compatible replacements for both R134a and modern alternative refrigerants to ensure your repair is successful.
Note: Requires complete system flush and expansion valve/capillary adjustment.
Embraco EGU90HLP (R600a – Isobutane, very efficient, 1/5 HP) mbsmpro.com
Tecumseh CAJ9480Z (R404A – Higher capacity)
Danfoss FR8.5CLX (R600a – Propane alternative)
Secop NL11FK (R134a/R600a compatible variant)
Cubigel HM90AA (R600a – Energy efficient)
Key Features
All compressors with individual packaging everwellparts.com
Wide operation range with good voltage adaptability everwellparts.com
Low noise and vibration everwellparts.com
Designed for low back pressure (LBP) applications everwellparts.com
Evaporating temperature range: -34.4°C to -12.2°C (-30°F to 10°F) www.mbsm.pro
Thermally protected mbsmpro.com
CE, IMQ, and IRAM certified www.mbsm.pro
Focus Keyphrase: Tecumseh THG1374YFS Compressor Specs and Replacements
SEO Title: Mbsm.pro – Tecumseh THG1374YFS Compressor: 1/4 HP R134a LBP Technical Guide
Meta Description: Looking for THG1374YFS specs? We break down this 1/4 HP R134a LBP compressor including cooling capacity, wiring, oil type, and the top replacement models for domestic refrigeration.
Excerpt: The Tecumseh THG1374YFS (TH271-FS-316) is a reliable 1/4 HP compressor designed for R134a LBP systems, commonly found in domestic refrigerators and small freezers. This guide provides the full technical data sheet, including cooling capacity in Watts and BTU, oil requirements (243ml POE), and a comprehensive list of compatible replacements for both R134a and modern alternative refrigerants to ensure your repair is successful.
Jiaxipera NX1122Y R600a Compressor 1/4 hp Specs and Replacement
Category: Refrigeration
written by www.mbsmpro.com | March 7, 2026
Mbsm.pro, Compressor, Jiaxipera, NX1122Y, 1/4 hp, R600a, 200 W, 0.9 A, 1Ph 220-240V 50Hz, LBP, RSCR, -35°C to -15°C, Freezing
The Jiaxipera NX1122Y is a powerhouse in the world of domestic refrigeration. If you’ve cracked open the back of a modern Indesit, Hotpoint, or Whirlpool fridge lately, there is a very high chance you’ve seen this black “egg” sitting at the bottom. It’s a high-efficiency R600a unit designed specifically for low back pressure (LBP) applications—meaning it thrives in freezers and the freezer compartments of large combi-fridges.
Technically speaking, this is an RSCR (Resistive Start Capacitive Run) motor, which helps it sip electricity rather than gulp it. With a displacement of 11.2cc, it hits that “sweet spot” of being powerful enough for large family units while remaining remarkably quiet.
Technical Specifications: Jiaxipera NX1122Y
Feature
Specification Details
Model
NX1122Y
Utilisation
LBP (Low Back Pressure)
Domaine
Freezing / Deep Freezing
Cooling wattage at -23.3°C
198 – 205 Watts
Cubic feet (approx. cool)
14 to 18 cu.ft.
Litres (approx. cool)
400 – 500 Liters
Kcal/h
172 Kcal/h
TON (Refrigeration)
0.057 Ton
Oil Type and Quantity
Mineral / POE (approx. 180ml – 220ml)
Horsepower (HP)
1/4 HP
Refrigerant Type
R600a (Isobutane)
Power Supply
220-240V / 50Hz / 1 Phase
Cooling Capacity BTU
682 – 700 BTU/h
Motor Type
RSCR (Run Capacitor required)
Displacement
11.2 cm³
Winding Material
Copper
Pression Charge
Low Pressure (Suction)
Capillary Tube (Rec.)
0.031″ or 0.036″ (depending on length)
Refrigerator Models
Indesit, Ariston, Hotpoint, Whirlpool Bauknecht
Temperature Function
-35°C to -15°C
Fan Requirement
Static (No fan) or forced air depending on cabinet
Commercial use?
Primarily Domestic / Light Commercial
Amperage (Running)
0.85 A to 1.1 A
LRA (Locked Rotor Amps)
6.5 A
Type of Relay
PTC Start Relay
Capacitor Value
4µF or 5µF (Run Capacitor)
Country of Origin
China (Jiaxipera Compressor Co.)
Efficiency Metrics (COP)
Knowing how the compressor performs under different thermal loads is key for any tech calibrating a system.
Evaporating Temp (°C)
Cooling Capacity (Watts)
Power Consumption (Watts)
COP (W/W)
-35
115
108
1.06
-30
152
125
1.21
-23.3
200
148
1.35
-20
228
160
1.42
-15
275
178
1.54
-10
335
200
1.67
Replacement Guide
When you can’t find the exact Jiaxipera model, you need something that matches the displacement and the BTU output. Here are the best alternatives:
5 Replacements (Same Gas: R600a)
Embraco: EMY70CLP or EMY80CLP
Secop (Danfoss): TLES10KK.3
Siklan: GVY11AA
ACC / Cubigel: HMK12AA
Huayi: HYB11AA
5 Replacements (Other Gas: R134a)
Note: This requires a full system flush and oil check.
Focus Keyphrase: Jiaxipera NX1122Y R600a Compressor 1/4 hp Specs and Replacement
SEO Title: Mbsm.pro – Jiaxipera NX1122Y Compressor 1/4 HP R600a Specs & Equivalents
Meta Description: Full technical guide for the Jiaxipera NX1122Y compressor. Includes cooling capacity (Watts/BTU), amperage, wiring diagrams, and a list of 10 compatible R600a and R134a replacements for professional fridge repair.
Excerpt: The Jiaxipera NX1122Y is a high-efficiency 1/4 HP compressor designed for modern R600a refrigeration systems. Commonly used in Whirlpool and Indesit appliances, it offers roughly 200W of cooling capacity at LBP conditions. This guide covers its full technical specifications, COP efficiency data, and provides a comprehensive list of compatible replacement models for technicians and DIY repair.
Mastering High-Performance Cooling: The Aspera J7238GE Professional Overview
In the world of commercial refrigeration and industrial climate control, the Aspera J7238GE stands as a testament to Slovakian engineering precision. This 1.5 HP powerhouse is specifically designed for High Back Pressure (HBP) applications, making it a “go-to” choice for engineers managing large-scale walk-in coolers, industrial water chillers, and specialized air conditioning units.
Operating on R407C, an environmentally conscious HFC blend, the J7238GE provides a robust cooling capacity exceeding 13,000 BTU/h. Unlike standard household compressors, this unit utilizes a CSR (Capacitor Start – Run) motor configuration. This ensures high starting torque, allowing the compressor to kick in even under heavy thermal loads without tripping the thermal protection.
For the field worker, the reliability of the Slovakia-made Embraco/Aspera line is legendary. It handles the stresses of fluctuating ambient temperatures with grace, provided the maintenance of the forced-air cooling system is kept in check.
Efficiency Metrics (COP) & Performance Curve
The efficiency of the J7238GE is highly dependent on the evaporating temperature. Below is the performance data for R407C at a standard Condensing Temperature of 45°C.
Evaporating Temp (°C)
Cooling Capacity (Watts)
Power Consumption (Watts)
COP (W/W)
-10
1,950
1,210
1.61
-5
2,480
1,350
1.84
0
3,110
1,480
2.10
+5
3,845
1,620
2.37
+7.2
4,200
1,680
2.50
+10
4,680
1,750
2.67
Engineering Insight: R407C vs. R22 and R404A
When comparing the J7238GE to older R22 models or newer R404A units, several factors emerge:
Glide: R407C has a significant temperature glide. As an engineer, you must ensure the system is charged in the liquid phase to maintain the correct blend ratio.
Heat Transfer: R407C offers excellent heat transfer coefficients in HBP ranges, often outperforming R134a in similar physical footprints.
Displacement: With a 32.7 cc displacement, the J7238GE moves a significant volume of gas, making it far more efficient for medium-to-large commercial cabinets than the standard NJ series used in smaller retail fridges.
Maintenance and Field Advice
Oil Management: This compressor uses POE oil. It is extremely hygroscopic (absorbs moisture quickly). Never leave the system open to the atmosphere for more than 15 minutes.
Start Components: Always check the potential relay and capacitors if the compressor hums but fails to start. A weakened 20µF run capacitor is often the silent killer of these motors.
Vibration: Ensure the mounting grommets are secure. The J7238GE is a heavy-duty reciprocating model; excessive vibration can lead to copper fatigue and subsequent leaks.
Focus Keyphrase: Aspera J7238GE Compressor 1.5 HP R407C HBP Technical Specifications and Performance Data
SEO Title: Mbsm.pro – Aspera J7238GE Compressor | 1.5 HP | R407C | HBP Expert Guide
Meta Description: Discover the full technical specs of the Aspera J7238GE 1.5 HP compressor. Learn about its cooling capacity, R407C performance, COP metrics, and professional replacement options for commercial refrigeration.
Excerpt: The Aspera J7238GE is a powerhouse in the commercial cooling sector. Delivering 1.5 HP of performance using R407C refrigerant, this Slovakia-built compressor is designed for High Back Pressure applications. With a 32.7 cc displacement and a robust CSR motor, it provides reliable cooling for large-scale industrial chillers and commercial walk-in refrigeration systems worldwide.
I installed a 2-meter capillary tube. Is this a reason for ice buildup on the suction line?
Category: Refrigeration
written by www.mbsmpro.com | March 7, 2026
Focus Keyphrase: Refrigerator Suction Line Frost and Capillary Tube Length Optimization
SEO Title: Mbsm.pro, Impact of Capillary Tube Length on Suction Line Frosting
Meta Description: Is a 2-meter capillary tube causing ice on your suction line? Learn how capillary length, diameter, and refrigerant charge affect compressor health and cooling efficiency.
Excerpt: Troubleshooting frost on a refrigerator’s suction line requires a deep understanding of pressure drops. If a 2-meter capillary tube was recently installed, it might be the primary culprit behind liquid floodback. This article explores the technical relationship between expansion device length, refrigerant flow, and the critical balance needed to protect the compressor from terminal damage.
In the world of field refrigeration, precision is the difference between a long-lasting appliance and a catastrophic compressor failure. One of the most common issues encountered after a capillary tube replacement is the appearance of <u>heavy frost or ice on the suction (return) line</u>. While many technicians immediately jump to the conclusion of an overcharge, the physical dimensions of the capillary tube—specifically a length of 2 meters—often play a more significant role than realized.
The Physics of Restriction: Why Length Matters
The capillary tube acts as the fixed orifice expansion device. Its job is to create a specific “restriction” or pressure drop between the high-pressure condenser side and the low-pressure evaporator side. This restriction is governed by three variables: <u>Internal Diameter (ID)</u>, <u>Total Length</u>, and the <u>Friction Factor</u> of the refrigerant.
When a technician installs a capillary tube that is too short (such as 2 meters for a system designed for 3 meters), the following sequence occurs:
Reduced Resistance: The shorter path offers less friction.
Increased Mass Flow: More liquid refrigerant enters the evaporator than the system can effectively boil off.
Liquid Floodback: Because the evaporator cannot convert all the liquid to gas, the “excess” liquid refrigerant exits the evaporator and enters the suction line.
Frost Formation: The liquid refrigerant continues to boil inside the suction pipe, absorbing heat from the ambient air and causing moisture to freeze instantly on the exterior of the pipe.
Technical Comparison: Capillary Requirements by Compressor Capacity
To understand why 2 meters might be insufficient, let us look at standard industry benchmarks for R134a systems (the most common domestic setup).
Compressor Horsepower (HP)
Recommended Length (Meters)
Standard Diameter (Inches)
Typical Result of 2m Length
1/10 HP to 1/8 HP
3.0m – 3.5m
0.026 – 0.028
Severe Frost / Slugging
1/6 HP to 1/5 HP
2.8m – 3.2m
0.031
Moderate Frost on Return
1/4 HP to 1/3 HP
2.5m – 3.0m
0.036
Marginal Balance
Analysis of the 2-Meter Installation
If you have utilized a 2-meter capillary, you are likely operating at a length that is 20% to 40% shorter than the engineering specifications for most domestic refrigerators.
Scenario A: If the diameter is wide (e.g., 0.036″), 2 meters will almost certainly cause ice on the suction line because the “restriction” is too weak.
Scenario B: If the diameter is very narrow (e.g., 0.026″), 2 meters might work, but it is still risky as it leaves no room for error in the refrigerant charge.
The “Overcharge” Illusion
A significant trap for field workers is attempting to “fix” the suction line frost by removing refrigerant. While this may clear the frost, it often results in an <u>underfed evaporator</u>, meaning the freezer will not reach the desired -18°C or -24°C. The system becomes inefficient, and the compressor runs longer, increasing electricity consumption.
Comparative Symptoms: Capillary Length vs. Refrigerant Overcharge
Symptom
Short Capillary (2m)
Refrigerant Overcharge
Suction Line
Frosted / Icy
Sweating or Icy
Condenser Temp
Lower than normal
Extremely Hot
Evaporator Pattern
Partial Frosting / Uneven
Full Frosting
Amperage Draw
Higher than nominal
Significantly High
Cooling Speed
Slow pull-down
Rapid but unstable
Expert Engineering Notice and Advice
As an expert who has spent years diagnosing these cycles, I strongly advise the following “Rule of Thumb” for field repairs:
<u>Always Match the Original:</u> If the original capillary was 3 meters, do not settle for 2 meters. The extra length provides the necessary “buffer” to ensure only superheated vapor reaches the compressor.
<u>The Suction-Capillary Heat Exchanger:</u> Ensure that the capillary tube is soldered or wrapped tightly around the suction line for at least 1 meter. This sub-cools the liquid and helps evaporate any liquid returning in the suction line, preventing frost.
<u>Vacuum is King:</u> When changing a capillary, a deep vacuum (below 500 microns) is mandatory. Any moisture left in the system will freeze at the exit of your new 2-meter tube, causing a partial blockage that mimics a “short capillary” symptom.
Final Engineering Verdict
A 2-meter capillary tube is generally too short for standard 1/6 to 1/4 HP domestic refrigerators using R134a. This lack of length reduces the pressure drop, leading to liquid refrigerant exiting the evaporator. To resolve this without replacing the tube again, you can try:
Adding a “pigtail” or extension to the capillary to reach at least 3 meters.
Ensuring maximum thermal contact between the capillary and the suction line.
Precisely weighing the charge according to the manufacturer’s nameplate (grams/ounces) rather than relying on pressure gauges alone.
