Trane Middle Static Pressure Duct Type Air Conditioner: Technical Overview and Performance Guide

Trane’s middle static pressure duct type air conditioner in the 24,000 BTU/h class is designed for residential and light commercial projects that demand reliability, silent operation and precise air distribution. This unit combines robust construction with R410A refrigerant technology to deliver efficient cooling and heating across a wide range of indoor applications.

Main specifications

The nameplate identifies the indoor model as 4MXTE24ASB000AB and the outdoor model as 4TXKE24ASB0000A. The cooling capacity is rated at 24,000 BTU/h, while the heating capacity reaches 26,000 BTU/h, placing the system firmly in the 2‑ton segment for ducted installations. The unit uses R410A with a factory charge of 1950 g, ensuring compatibility with current environmental regulations and high operating pressures typical of this refrigerant. The maximum allowable pressure is specified at 4.2 MPa, with typical operating conditions of 4.2 MPa on discharge and 1.5 MPa on suction, reflecting the design for medium static pressure duct networks.

Electrical data and power performance

The power source requirement for this Trane ducted system is 220–240 V, 50 Hz, single phase, which aligns with standard low‑voltage networks in many markets, including residential and small commercial buildings. Rated current is listed at 14.0 A, with a rated input power of 2950 W, providing a clear reference point for circuit sizing and energy consumption estimation. The outdoor unit carries a protection class of IP24, indicating resistance to water splashes and solid objects larger than 12.5 mm, which is essential for safe operation in exposed external locations. These electrical characteristics help designers and installers evaluate cable sizing, breaker selection and overall energy performance when integrating the system into a building.

Refrigerant circuit and pressure safety

Operating with R410A at high pressures, the system is engineered to handle demanding conditions while maintaining safety. The maximum allowable pressure of 4.2 MPa for the circuit, together with specified discharge and suction pressures, underlines the importance of using compatible tools, hoses and gauges during service operations. Excessive operating pressure limits on discharge and suction sides guide technicians during commissioning and troubleshooting, helping to identify abnormal conditions such as overcharging, blocked airflow or non‑condensable gases in the circuit. Correct handling of R410A and adherence to pressure limits are critical to protect the compressor, heat exchangers and associated piping over the life of the installation.

Installation considerations and duct design

As a middle static pressure duct type air conditioner, this Trane model is optimized for installations where air must be distributed to multiple rooms through short to medium duct runs. Medium static pressure capability allows the unit to overcome resistance from supply grilles, filters and bends, while still maintaining comfortable airflow levels in each zone. Installers must calculate total external static pressure, select appropriate duct dimensions and ensure proper balancing dampers to match the fan performance curve of the indoor unit. Good duct design, combined with adequate return air pathways and filtration, contributes to stable room temperatures, low noise levels and reduced energy losses.

Safety instructions and maintenance

The manufacturer emphasizes several safety and maintenance instructions directly on the rating label of the outdoor unit. Technicians are instructed to evacuate the air inside the indoor unit and piping before charging refrigerant in order to avoid moisture and non‑condensable gases that could damage the compressor. Only qualified personnel should perform installation and service work, following local electrical and refrigeration codes to prevent electric shock, fire or refrigerant leakage. Regular maintenance, including cleaning coils, checking electrical connections and verifying refrigerant pressures against the nameplate data, is essential to keep the system operating at the stated capacities and to extend the equipment’s service life.

---

Key technical data table

Parameter	Value
Indoor unit model	4MXTE24ASB000AB
Outdoor unit model	4TXKE24ASB0000A
Cooling capacity	24,000 BTU/h
Heating capacity	26,000 BTU/h
Refrigerant type / charge	R410A / 1950 g
Power supply	220–240 V, 50 Hz, 1‑phase
Rated current	14.0 A
Rated input power	2950 W
Maximum allowable pressure	4.2 MPa
Typical discharge / suction press.	4.2 MPa / 1.5 MPa
Outdoor unit protection class	IP24

Tecumseh CAJ9480T R22 Hermetic Compressor: Complete Technical Guide for Professionals

The Tecumseh / L’Unité Hermetique CAJ9480T is a fully hermetic reciprocating compressor designed for commercial refrigeration systems operating with R22 and compatible retrofit refrigerants. Widely used in small cold rooms, display cabinets and compact condensing units, it runs on 220–240 V single‑phase, 50 Hz power and delivers 5/8 HP with around 1.97 kW of cooling capacity at EN12900 conditions.​

General description

This model belongs to the CAJ family, Tecumseh’s workhorse range for medium and high back‑pressure refrigeration applications such as positive‑temperature cold rooms and commercial coolers. It is a hermetic piston compressor using a CSR motor (capacitor start, capacitor run), giving high starting torque and stable operation on standard single‑phase networks.​

Manufactured in France under the L’Unité Hermetique brand, the CAJ9480T combines compact size, good efficiency and a robust mechanical design, which explains its popularity among installers and service companies like Mbsmgroup, Mbsm.pro and mbsmpro.com.​

Main technical specifications (with HP and W)

The table below consolidates key data from Tecumseh specification sheets and trusted distributors.​

Specification	CAJ9480T value (R22, 50 Hz)
Refrigerant	R22 (and some approved retrofits such as R438A on specific codes)​
Application range	Medium / high back pressure (commercial refrigeration)​
Nominal horsepower (HP)	5/8 HP (0.625 HP)​
Nominal cooling capacity (W)	≈ 1 968 W at EN12900: 220 V, 50 Hz, +5 °C evap / +50 °C cond​
Input electrical power (W)	≈ 780–800 W at the same EN12900 rating point​
Displacement	15.2 cm³/rev​
Supply voltage	220–240 V, 1‑phase, 50 Hz​
Voltage range	187–242 V (50 Hz)​
Rated load amps (RLA, 50 Hz)	≈ 4 A​
Locked rotor amps (LRA)	≈ 24 A​
Oil type / quantity	Synthetic alkylate or mineral, approx. 475–887 cm³ depending on version​
Net weight	≈ 19–22 kg​

The nameplate visible in your photo shows “R22 – LRA 24 – 203–220 V – 50 Hz – RLA 4.00”, matching these published values and confirming a single‑phase CAJ9480T produced in France.​

Typical applications and field use

Because of its capacity, voltage and starting characteristics, the CAJ9480T fits many everyday refrigeration jobs.​

• Small cold rooms for butchers, restaurants, bakeries and mini‑markets originally charged with R22.
• Vertical display cabinets, reach‑in fridges and refrigerated counters using factory‑built condensing units.
• Custom‑built condensing units and mini‑packs produced by specialists such as Mbsmgroup, Mbsm.pro and mbsmpro.com, especially where reliable 5/8 HP performance is required on 230 V single‑phase.​

Its CSR motor and high starting torque help the compressor start under tougher conditions, such as long pipe runs or marginal supply voltage.​

Installation and maintenance best practices

Correct installation and servicing are essential to protect this compressor and keep systems efficient.​

• Flush and evacuate the circuit carefully, and always install a new filter‑drier when replacing a failed R22 compressor.
• Use the start and run capacitors and potential relay recommended by Tecumseh (for example, 88 µF start and 15 µF run on the CAJ9480T‑FZ code) and follow the official wiring diagram.​
• Verify charge, suction superheat and condensing temperature so operation stays within Tecumseh’s performance envelope.​
• For R22 retrofit projects, respect manufacturer guidance on compatible replacement refrigerants and oil changes to avoid lubrication and overheating issues.​

Working with trusted suppliers such as Mbsmgroup and its online platforms helps ensure genuine Tecumseh parts, correct electrical components and updated technical information.

[pdf-embedder url=”https://mbsmpro.com/wp-content/uploads/2025/11/mbsmgroup.tn-دليل-عملي-لتحويل-LRA-إلى-طن-تبريد-بطريقة-احترافية.pdf” title=”mbsmgroup.tn-دليل عملي لتحويل LRA إلى طن تبريد بطريقة احترافية”] [pdf-embedder url=”https://mbsmpro.com/wp-content/uploads/2025/11/mbsm.pro-Mbsmpro-LRA-to-Ton-MBSM-DOT-PRO.pdf” title=”mbsm.pro-Mbsmpro LRA to Ton – MBSM DOT PRO”]