Secop TLES6FT.3 R134a 1/5 HP LBP Compressor Specifications and Replacement Guide
Mbsmpro.com, Compressor, Secop, TLES6FT.3, 1/5 HP, R134a, Cooling, 149 W, 1.1 A, 1Ph 220-240V 50Hz, LBP, RSIR/CSIR, Slovakian Engineering
When it comes to domestic refrigeration, few names carry as much weight as Secop. Formerly known under the Danfoss brand, these Slovakian-made powerhouses have become the backbone of reliable household cooling. Today, we’re breaking down the TLES6FT.3, a Low Back Pressure (LBP) compressor designed for efficiency and long-term durability in R134a systems.
If you’re a technician in the field, you know that the TLES series is prized for its compact footprint and low noise levels. It’s a “set it and forget it” component that handles the rigorous demands of modern energy standards without breaking a sweat.
Technical Data & Performance Specifications
The following data provides a granular look at the mechanical and electrical heart of this unit.
| Feature | Specification |
| Model | TLES6FT.3 |
| Utilisation | LBP (Low Back Pressure) |
| Domaine | Freezing / Cooling |
| Cooling Wattage (-23.3°C) | 149 Watts (ASHRAE) |
| Cooling Capacity (BTU/h) | 508 BTU/h |
| Cubic Feet Capacity | Approx. 7 to 9.5 cu. ft. |
| Liters Capacity | 200 – 270 Liters |
| Kcal/h | 128 Kcal/h |
| Oil Type and Quantity | POE (Polyolester) / 180 ml |
| Horsepower (HP) | 1/5 HP |
| Refrigerant Type | R134a |
| Power Supply | 220-240V / 50Hz / 1 Phase |
| Motor Type | RSIR/CSIR (Depending on Starter) |
| Displacement | 5.70 cm³ |
| Winding Material | Copper |
| Pressure Charge | Low Pressure (Suction Side) |
| Capillary Tube (Suggested) | 0.031″ ID x 3 meters (Approx.) |
| Appliance Type | Refrigerators, Deep Freezers |
| Operating Temp Range | -35°C to -10°C |
| Cooling Method | Static (No Fan Required) |
| Commercial Class | Domestic / Light Commercial |
| Amperage (RLA) | 0.95 A – 1.1 A |
| Locked Rotor Amps (LRA) | 7.5 A |
| Start Relay | PTC or Electromagnetic |
| Run Capacitor | Optional (usually not required for RSIR) |
| Country of Origin | Slovakia |
Efficiency Metrics (COP) & Performance Curve
Efficiency is where the TLES6FT.3 truly shines. The Coefficient of Performance (COP) varies based on the evaporating temperature. Use this table for precise diagnostics during system charging.
| Evaporating Temp (°C) | Cooling Capacity (Watts) | Power Consumption (Watts) | COP (W/W) |
| -35 | 82 | 88 | 0.93 |
| -30 | 110 | 102 | 1.08 |
| -23.3 (Standard) | 149 | 122 | 1.22 |
| -20 | 172 | 134 | 1.28 |
| -15 | 215 | 150 | 1.43 |
| -10 | 268 | 168 | 1.60 |
Wiring & Connection Schematic
For the electrics, the TLES6FT.3 utilizes a standard triangular pin configuration. Proper wiring is essential to prevent winding burnout.
- Common (C): Top Pin.
- Run (R): Bottom Right Pin.
- Start (S): Bottom Left Pin.
- Logic: The PTC starter bridges the Start and Run windings briefly to initiate rotation. If using a CSIR setup, a start capacitor (usually 60-80 µF) is placed in series with the start winding.
Cross-Reference & Replacement Guide
If the TLES6FT.3 is unavailable, these alternatives offer similar displacement and BTU output.
Direct R134a Replacements (Same Gas)
- Embraco: EMS 55 HLC / EMYe 70 CLP
- ZMC/Zem: GL60AA
- ACC / Cubigel: GVY57AA
- Huayi: HYE60MT
- Tecumseh: THB1355Y
R600a Conversion Alternatives (Requires System Flush)
Note: Converting from R134a to R600a requires a complete change of the capillary tube and filter drier.
- Secop: TLY5.7KK.3
- Embraco: EMX55CLC
- Jiaxipera: T1114Y
- Sikap: HMK95AA
- Donper: L72CZ1
Expert Insight: Installation & Maintenance Notice
As a field engineer, I’ve seen these units last 15+ years when installed correctly. The TLES6FT.3 is a “high-tolerance” unit, but it is sensitive to moisture. Because it uses POE oil, which is highly hygroscopic (absorbs water), you must keep the system sealed until the very moment of brazing.
- Pro-Tip: Always replace the filter drier when swapping this compressor. A 15g or 20g drier is standard for this capacity.
- Vacuuming: Do not skip the vacuum stage. A minimum of 250 microns is recommended to ensure the POE oil remains stable.
- Charging: Charge by weight according to the refrigerator manufacturer’s label. Overcharging R134a systems will lead to high head pressure and premature valve failure.
Focus Keyphrase
Secop TLES6FT.3 R134a 1/5 HP LBP Compressor Specifications and Replacement Guide
SEO Title
Mbsmpro.com | Secop TLES6FT.3 Compressor | 1/5 HP | R134a | LBP Guide
Meta Description
Get the technical specs for the Secop TLES6FT.3 compressor. 1/5 HP, R134a, 149W cooling capacity. Includes wiring diagrams, replacement cross-references, and expert COP tables.
Slug
secop-tles6ft-3-compressor-r134a-1-5hp-specs
Tags
Secop, TLES6FT.3, R134a, 1/5 HP, Compressor, Mbsmgroup, Mbsm.pro, mbsmpro.com, mbsm, Slovakia, LBP, EMS55HLC, GL60AA, GVY57AA, HYE60MT, THB1355Y, Refrigeration Repair, Danfoss Compressor
Excerpt
The Secop TLES6FT.3 is a cornerstone of modern domestic refrigeration. This 1/5 HP, R134a compressor is engineered in Slovakia for Low Back Pressure applications, offering a cooling capacity of 149W. Known for its quiet operation and energy efficiency, it is the ideal choice for medium-sized refrigerators and deep freezers looking for long-term reliability.
